Difference between revisions of "Release notes/1.2"
m (Calligraphy tool improvement actually is a bugfix)
m (→Selector Tool: write instructions, fix 'grey cross')
|Line 118:||Line 118:|
=== Selector Tool ===
=== Selector Tool ===
the origin of the selectionprecise :
[[File:Change origin of selection.gif]]
[[File:Change origin of selection.gif]]
[[File:Change origin to TOP right.gif]]
[[File:Change origin to TOP right.gif]]
=== Text Tool ===
=== Text Tool ===
Revision as of 20:25, 21 January 2022
|These Release Notes are in Draft Status.
Definitely not released yet.
- Inkscape documents can now hold multiple pages, which are managed by the new Page tool
- Performance improvements for many parts of the interface and many different functions
- Editable markers and dash patterns
- On-canvas alignment snapping
- Selectable origin when scaling
General user interface
The overall look and options of the color palette and the Swatches dialog got a massive overhaul (MR #2881):
- Color palettes now have a preview
- Improved settings for size and padding
- New setting for number of rows
- Scroll vertically through palette rows, or use the arrow buttons
- The layer selection dropdown has been replaced by a layer indicator. Clicking on the indicator opens the new Layers and object dialog. This change improves Inkscape's performance for documents with many layers (MR #3629).
- The page shadow now has a more realistic, blurry, fade-out look (MR #3128)
- Settings for the page background / decoration were refactored, see [section about Document properties dialog]
- Inkscape documents can now hold multiple pages! See [section about the new Page tool]
- Snapping toolbar got removed and replaced with new simplified snapping pop over. You can find it in top Right corner as a toggle switch with arrow for change preferences.
- Snapping settings got unified and settings are no longer saved in to svg file but to to preferences inside of inkscape.
- All snapping settings are moved to Preferences> Behavior > Snapping
Preferences has two modes:
- Simple - 3 options (Bounding box, paths, Alignment snapping). This should be good simple preset for most of users needs.
- Advanced - All granualr control over every snapping option. This provides all functionality for pro users (MR #3323)
Alignment and Distribution snapping
Three new modes of on-canvas snapping have been added. These new modes make aligning and distributing objects a very easy drag and drop operation.
The new snapping options can be enabled or disabled from the
Snap popover -> Advanced using the following new options:
- Alignment Snapping : Toggle alignment snapping for objects.
- Self snapping : Toggle alignment snapping for nodes in the same path while editing nodes.
- Distribution snapping : Toggle distribution snapping.
Alignment and distribution snapping also have their separately configurable snap tolerances which can be adjusted in
Document Properties > Snap.
Both Alignment and Distribution snapping also have a preference to show snap distances which can be enabled or disabled from
Preference > Snapping > Show snap distance in case of alignment or distribution snap.
are horizontal or vertical lines that only appear when you're editing objects on the canvas. Temporary guide lines appear if the selected object can be aligned relative to another object on the canvas. Once a guide does occur, the movement of the selection is constrained in the general direction of the guide which makes placing objects on the canvas easier.
is useful for node editing. Nodes will snap to their own geometry
are also a new feature added to Inkscape. These are spacing guides that appear in between equally spaced objects. These guides make it easier to place objects at equal distance from each other. These guides also appear in horizontal or vertical direction based on the optimum snap position.
The new Page tool (lowest button in the tool bar) allows you to create multi-page Inkscape documents, and to import as well as export multi-page PDF documents. (MR #3486, MR #3785, MR #3821). It supports overlapping pages and pages of different sizes in a single document.
- To create a new page either:
- click-and-drag on the canvas
- or click on the 'Create a new page' button in the tool controls
- To delete a page, click on the page to select it, then click on the button
Delete selected pageor use the
- To move a page on the canvas, click-and-drag it to the desired new position. If the option to
Move overlapping objectsis active, this will also move any objects that touch the page along with it.
- To change a page's size:
- click on a page whose size you want to change to select it, then drag the square-shaped handle in its bottom right corner
- click on the page, and then choose one of the predefined sizes in the page size dropdown, or enter your size values for the 'Custom' option, by typing them into the field in the form of
10cm x 15cm
- To fit a page to:
- the size of the drawing, make sure to have no object selected before you switch to the Page tool. Then select a page by clicking on it, then click on the button 'Fit page to drawing or selection' in the tool controls
- a selected object, first select the object(s) with the selection tool, then switch to the Page tool, click on a page to select it, then press the the button 'Fit page to drawing or selection' in the tool controls
- To add a label to your page, select the page by clicking on it, then enter a name or label for it into the text field in the page tool's tool controls. Labels are always visible, no matter which tool is currently selected.
- To export a multi-page PDF file, use
File > Save a copy … > PDF. This will automatically include all pages.
- To open or import a multi-page PDF or (pdf-based) AI file, use
File > Open/Import > select file name > choose to import 'All' pages[Known issue: 'import' moves content of some pages to some far out place in the drawing]
Note: Multi-page SVG files are an Inkscape-specific concept. Web browsers will only display the first page of your document.
The tool now allows to set the origin of the selection for precise numerical positioning:
- Click on one of the 9 object handles to select your desired origin for the scaling, or select and then drag the middle handle to the desired position
- A small red circle now indicates the new origin and the x/y position in the tool controls will adjust to the new origin.
- Now edit the x, y, width or height values to move and scale your object using the new origin (MR #2700)
- Kerning options are now symbolized by a button between the subscript and text direction selectors. Clicking on it will open a so-called pop-over, where all previously available options can be found. This change saves space in the Text tool's toolbar.
- Negative kerning values can now be as little as
-1000(previously -100), making them symmetrical to their positive counterparts (MR #2569, MR #3434)
- Padding: Text that is flowed into a shape and standard flowed text now have an additional square-shaped handle in the top right corner. Move the handle to adjust the text padding inside the frame (MR #2769) [Currently broken]
- Exclusion zones: Text can now flow around one or more movable objects (use shapes and paths on the same object hierarchy level as the text; no groups / images supported). Select the object(s) and the text, and set the exclusion zone by going to
Text > Set subtraction frames
Background info: SVG 2.0 flowed text allows for shape-padding and shape-subtract attributes. shape-padding lets the text flow into a shape and leave some space between it's edges and where the text will start to flow. shape-subtract will subtracting shapes with margin, so text can flow around other objects in the scene. These attributes were supported in Inkscape 1.0, but not exposed to the user. This version of Inkscape includes both an adjustable on-canvas knot for changing the padding as well as a Text menu item for setting text subtraction properties with a further knot to adjust it's margins.
[See merge request for animated gifs to add here]
Split path, split non-intersecting path functionality.
Path > split path
Useful for splitting Letter or other objects made from multiple paths(usually holes) in to single object (MR #3738)
- A mini-menu (downward pointing arrow symbol) was added into the title bar of every multi-dialog panel (also called 'notebook'). You can use it to close the current tab, to undock it, or to close the whole panel. It also shows a list of available dialogs, sorted by purpose, allowing you to open them with a click ((MR #3728)
- Open dialogs are now less costly for performance, because they do not update when it's not needed (MR #3369), or when they are hidden (MR #3761)
- Docking zones now expand and flash slowly when a dialog is dragged close to them. This makes it easier to see where docking is possible ((MR #3729)
- The text labels of docked dialogs are now more responsive to the width of dialog (MR #3627)
Align and distribute
- The formerly separate
Arrangedialog is now integrated with the
Align and Distributedialog. With its three tabs, more user-friendly names and some small visual tweaks, the dialog now holds everything that is needed for aligning, distributing and arranging objects in your drawing (MR #3382, MR #3667).
- The icons inside this dialog are now smaller.
We revamped the document properties dialog from old cluttered, not so user friendly to completely redesigned dialog that users will enjoy
We redesigned document properties. Since we introduce new feature Multipages wich is not part of svg standart (not suported by browsvers). we cahneg this dialog to contol how big is a viewbox (what gets shown in browsvers). We use first page is also viewbox (MR #3700).
We moved out snapping settings ouside this dialog and also outside of svg document in to preferences.
Fill and Stroke dialog
- The more intuitive HSL mode (hue, saturation, lightness) is now the default mode of the color selector.
- All color selection modes (e.g. HSL, HSV, RGB, CMYK, color wheel, CMS) have been moved into drop-down menu, with icons. You can get the old, tabbed look back by disabling the option in
Edit > Preferences > Interface > Use compact color selector mode switch(MR #3443).
Gradient Editor is back
This allows you to add, edit and delete gradient stops directly in the 'Fill and Stroke' dialog again.
- to add a new stop, double click on the gradient preview
- to move a stop, click and drag it along the gradient preview or enter the stop offset numerically for more precision
- to remove a stop, click on it to select it, then press the
The Gradient tool toolbar options `repeat mode`, `reverse gradient direction`, a gradient selection library and a list of all stops have been added here, too, so all the options pertaining to gradients are in easy reach.
Another way to add, edit and delete single stops is to use the list of gradient stops. Users can add stops by clicking on the
+ button, and can delete them by clicking on the
With the new gradient selection dropdown, users can duplicate gradients by clicking on the
Users can offset (move) the first and last stops of a gradient. The color beyond the last/first gradient stop is uniformly that of the last/first stop and it becomes transparent where the gradient postion handles end.
Markers have new drop-down options where you can control size offset and rotation of markers. This allowed us to remove duplicate markers so UI is much easier to navigate. We also cleaned out marker presets and added few new arrows and also join ends
Custom Dash strokes
We added UI for editing custom dash stroke pattern. Click on Custom option inside a dash stroke drop-down and this field will be shown under it. Now you can add your custom pattern by typing numbers (dash gap dash gap ...)
Other small changes
we reorder caps to mach order (MR #3402)
Layers and Objects dialog
We fused Layers and objects dialog in to new improved dialog. New Layers and Objects dialog significantly improves performance when handling many objects at the same time (MR #2466, MR #3635, MR #2466, MR #3741, MR #3597, MR #3645).
- new icons for every object type
- first object icon enable/disable view of objects
- masks and clipping paths are added as a overly suicon
- every new layer has new color
- Colors of icons in panel and paths on canvas are linked for better organization
- you can edit color of of layer/object by slisking on color block on right
- default highlight colors delegated to
- double click label (name of the object) to rename it
- info-bar shows you current layer if you click on it and will open layers dialog
- shift-click on an eye icon toggles layer solo visibility (hiding others)
- shift-click on a padlock locks other layers
- If you hold Alt and hover over items in dialog all other elements get lover opacity. So you can see what exactly is the object you pointing at
- Preferences zoom ruler respect theme look (MR #3450)
- Allow select same to work like select all (MR #2832)
SVG Font Editor
The Swatches dialog uses the same improved settings as [the color palette].
Text and Font dialog
The dialog's width has been reduced, so it won't take up excessive amounts of space when docked (MR #3314).
Clean up of ui: Added sliders , fixed live preview, dialog is size responsive (MR #3405)
We cleaned up this dialog, reduced width and added explanation for metric transformations (MR #3381)
Live path effects
perspective/envelope LPE now works on objects with 0 width or height . (edge cases for single line stroke) (MR #2712)
Import / Export
Customization / Theming
General User Interface
- The font size in the user interface can be adjusted at
Edit > Preferences > Interface > Theming: Font scale(MR #3690)
-buttons for number entry fields are now smaller. If you prefer the old, wider buttons, they can be turned on again by disabling
Preferences → Interface : Use narrow number entry boxes. (MR #3358)
Bars / Toolbars
- You can now hide elements from the status bar (style indicator, layer indicator, mouse coordinates, canvas rotation) at
Edit > Preferences > Interface: Status bar(MR #3445)
- You can now hide tools from the tool bar at
Edit > Preferences > Interface > Toolbars: Toolbars(MR #3515)
- The drop shadow is now optional for mouse cursors. You can turn it off in
Preferences > Interface > Mouse cursors: Show drop shadow(MR #3352).
- Multiple icons in the Multicolor icons set got small retouches and other improvements to readability or contrast, e.g. the green color is now a little brighter when using a dark theme, to improve contrast.
- Cursors and icons for the Bézier tool and the Calligraphy tool in the tool bar now use the same imagery [to be confirmed]
Align and distributeicons are now smaller, some were redesigned to fit in to 16x16 grid.
- The icon sizes for the tool bar and the control / tool controls bar can now be adjusted smoothly on a continuous scale from from 100% to 300% in
Edit > Preferences > Interface > Toolbars: Toolbox icon size / Control bar icon size
- A contrast slider was added for fine tuning the selected theme's colors at
Edit > Preferences ⯈ Interface ⯈ Theming: Contrast(MR #906)
On macOS, enable all special menu items in the application menu and hide them from other menus (MR #3767)
Modifier keys now work with pen input (Commit #46c12b)
- Add option to limit output extension to save copy (MR #3600)
- Added Python app dirs dependency (MR #3568) [Is this a bug fix?]
Behind the curtains
continuous work on converting verbs to Gio::Actions . This work is done as a preparation for migration to gtk4 and also allows us to have this commands in command pallet and assign shortcuts to this coverted commands. (TODO: there is lots of MRs mostly from tav which needs to be sorted and added here)
Add support for x, y, width and height SVG2 attributes on <symbol>. Follows logic of <svg> element, which already supported these attributes (MR #3828)
- Check knot still exists before updating (MR #717)
- Masive colection of crash fixes releted to number of LPE (copy, stampe, duplicate) (MR #3479)
- Action after grouping 3D boxes crash Fix (MR #3698)
- Fix for crashing of inkscape while Quiting (MR #3681)
- Fix crash due to invalid or malformed direct-action string (MR #3663)
- Bezier curve tool Backspace crash (MR #3715)
- Fix crash scrolling across line height units (MR #3541)
- Fix adding a path effect to symbol causes crash (MR #3520)
- Fix drag-and-drop svgs, stops crash (MR #3710)
- Handle two items in spray tool's single path mode (MR #3470)
- Icon preview crash (MR #3439)
- Prevents crashing during 3D box import (MR #3592)
- Fill between Paths LPE crash on selecting (MR #3801)
Other bug fixes
- Calligraphy tool: use correct tool tilt direction (MR #3782, Bug #1692)
- duplicated gradeint does not get deleted (MR #3361)
- Last line in paragraph is not justified anymore (MR #3780)
- Fix #1034 - Recursively flatten css style when copying (MR #3656)
- new boolean operation algorithm (MR #3724)
- Respect mouse down before mouse move coordinates (WIN) (MR #3735)
- Remove mandatory break from end of paragraphs, added in Pango 1.49 (MR #3630)
- Fix: Subsequent font changes to words in the same textbox now apply (MR #3631)
- Fix numpad input for unimode in text tool (MR #3689)
- Restore refresh of units trackers (MR #3665)
- Fix find and replace if text has description, nested tspans (MR #3551)
- all canvas knots should have same size and be controlled form preferences (MR #3679, MR #3699)
- Fix multiline vertical text positioning in browsers (MR #3537)
- Stop changing line height when units change (MR #3544)
- Fix Clone Tiler menu item, action mismatch (MR #3650)
- fix: Cannot quit Inkscape on macOS Big Sur from welcome screen (MAC) (MR #2762)
- Fix: Position of flowed text no longer applies extra transforms on text (MR #3695)
- Fix default value for saturate in color matrix filter (MR #3626)
- nodes widget no longer appears on startup in align and distribute dialog (MR #3677)
- fixes #2621. Clicking on fill/stroke in the status bar now reopens the dialog if it is hidden (MR #3754)
- Fix KP_2,4,6,8 shortcuts for rect tool (MR #3773)
- Transform handle modifiers are now displayed on status bar (MR #3809)
Even more bug fixes
There were even more issues fixed than those listed above, but these probably only affect a small portion of users, or are relevant for development and packaging only.
The following UI translations received updates:
The Windows installer translation was updated for [2021-03-03]:
The following documentation translations received updates:
Contributing to interface translations
Want to help with translations? Learn how to help!
Contributing to documentation and documentation translation
Contributions to the documentation translations, as well as improvements to its contents, are welcome at the inkscape-docs repository.
Important changes for packagers
- New dependency on
python-cssselectadded which is required for usage of Inkscape extensions (MR #3239)
- Gradient editing [as of 2021-06-26]:
- Gradient collecting is problematic. It deletes your gradient if it's not used by any other object. Will be fixed with 3361
- If you convert your gradient to swatch, the gradient editor cannot be used for editing it anymore.
- The first click after exiting the gradient library is ignored.
- Canvas stops and gradient editor stops highlighting will stop working in some cases.
- Inkscape 1.3 — development branch
- Inkscape 1.2 (1.2.1) — current stable release branch
- Inkscape 1.1 (1.1.1, 1.1.2)
- Inkscape 1.0 (1.0.1, 1.0.2)
- Inkscape 0.92 (0.92.1, 0.92.2, 0.92.3, 0.92.4, 0.92.5)
- Inkscape 0.91
- Inkscape 0.48 (0.48.1, 0.48.2, 0.48.3, 0.48.4, 0.48.5)
- Inkscape 0.47
- Inkscape 0.46
- Inkscape 0.45
- Inkscape 0.44
- Inkscape 0.43
- Inkscape 0.42
- Inkscape 0.41
- Inkscape 0.40
- Inkscape 0.39
- Inkscape 0.38
- Inkscape 0.37
- Inkscape 0.36
- Inkscape 0.35