Difference between revisions of "Google Summer of Code"
|Line 48:||Line 48:|
Remember: ''we want you to succeed!''
Remember: ''we want you to succeed!''
= Ideas =
Revision as of 07:12, 21 January 2016
- 1 Welcome to Inkscape!
- 2 Student Applications
- 3 The "two patches" rule
- 4 Performance Evaluation
- 5 Project Ideas
- 5.1 Template
- 5.2 General
- 5.3 XML tree
- 5.4 2Geom geometry library
- 5.5 Object tree
- 5.6 User interface
- 5.7 Project infrastructure and platform support
- 5.8 Rendering Improvements
- 5.9 Better SVG standard coverage
- 5.10 Live Path Effects related
- 6 Successful SOC Projects from Previous Years
Welcome to Inkscape!
For quite a few years Inkscape has been successfully participating in Google Summer of Code.
GSoC is a program where Google funds the development of specific features in open source software by university students. You don't need to be a Computer Science student to apply. Features to be developed are picked by Inkscape administrators from the pool of proposals submitted by students.
We've mentored about half a dozen students a year since GSoC started. Many students enjoyed their work and continue to be involved; perhaps your mentor will be a past GSoC student! We have a high rate of acceptance of student code into the core codebase. Indeed, GSoC projects have been a key source of some of Inkscape's best features in the past several releases.
If you are interested in joining us this summer, it is time to get your proposal ready. You can choose a proposal from our list of suggestions or come up with one of your own. In either either case, you must give us a detailed outline of what you plan to do. It is highly recommended that you discuss your idea as early as possible with Inkscape developers. They not only can give you guidance as you flesh out your proposal but ultimately you must convince them that you can do the work planned in the time allotted.
- Google program information:
- Home page.
- Summer of Code Application form. Applications open at 19:00 UTC on March 10th.
- Inkscape-specific information:
Student Applications for GSoC 2014 must be submitted to the GSoC site by 19:00 UTC on March 21st 2014.
The "two patches" rule
We require two patches from each potential GSoC student, before accepting the student for GSoC participation (it is the same requirement as for obtaining rights to commit changes to the Bazaar code repository). The reason for this requirement is that you can show us that you have succeeded in building Inkscape on your PC, and that you have understood a little piece of Inkscape's code and are able to improve it. Inkscape is a large project, and you really should not try to understand all the code. Many (all?) developers know only parts of the program code! You can join our jabber/IRC channel and ask developers for help.
Suggested "easy" bug fixes or improvements
To get you started on Inkscape development, you can find (probably) easy-to-fix bugs or small improvements that require very little knowledge of the whole program by searching our bug-tracker for bugs tagged with 'easy-fix'.
GSoC has two formal evaluation points, at the mid-term and at the end. These evaluations determine if you receive the stipend from Google. In order to receive a pass for the evaluations you will need to show adequate progress toward your project's goals.
To help you meet your goals and so that your mentor can better evaluate your progress you need to:
- Have frequent, public discussions of your progress. (Don't rely on just your mentor for advice.)
- Have a public Inkscape branch for your code to which you commit regularly.
- Give weekly status reports.
For the final pass, you will normally be required to merge your code into Inkscape trunk.
Remember: we want you to succeed!
- Programming skills needed:
- Estimation of difficulty:
- Potential mentors:
- Related materials
[More detailed description]
- Improve startup time and initialization performance (i.e. improve font cache).
- Improve icon cache: Convert the icon cache (widgets/icon.cpp) to create the PNGs with a directory structure and index file matching the icon theme specification. Use this to get rid of customized classes InkAction, SPIcon, and so on.
- Continue C++ migration:
- Use Glib::ustring for UTF-8 data and std::string for filenames and raw byte strings instead of C-strings (char*).
- Replace uses of GList and GSList with STL containers.
- Use a different data structure for Inkscape::Selection. Inkscape::Selection currently uses GSList as its data structure. This is suboptimal, since a very common operation is checking whether some object is selected. Change Inkscape::Selection so that its underlying structure is a boost::multi_index container which implements the same semantics as Java's LinkedHashSet.
- Extension system improvements: Refactor the extension API. Clean up the kludgy class hierarchy, possibly using multiple inheritance. Use GInputStream and GOutputStream as parameters instead of file paths, so that things like the clipboard can write data to memory without going through a temporary file.
- SAX parser: Convert the current document parser from DOM to SAX, so that it creates our XML tree right away, instead of creating the libxml2 DOM tree, creating our tree to match it, then freeing the libxml2 tree. This should improve performance and allow more robust fixes for some problems.
- Typed XML tree: Improve XML tree so that it can store some attributes in parsed, binary form. The main target of this are the data URIs used to embed images, which could be stored as binary data only. This work should be done after completing the SAX parser, as this will make it easier.
2Geom geometry library
- Rewrite of Geom::PathVector and Geom::Path:
- Change PathVector to be a real object instead of a std::vector of Path, so that it can have useful methods, similar to curves.
- Move the copy-on-write idiom to the PathVector object, rather than using it in the Path.
- Investigate whether it is possible to store subpath data in a more compact way and make the Curve objects only convenience facades. Right now, if the path has only linear segments, every point is stored twice.
- Apply the following renames to match SVG terminology:
- Path -> Subpath
- PathVector -> Path
- Remove SPCurve: SPCurve is a thin wrapper around Geom::PathVector which exists for historical reasons. Its functionality should be added to PathVector, and SPCurve should be purged.
- Provide a quick bounding box routine for stroked paths.
- Boolean operations and stroking: Add methods to PathVector objects:
- Set operators (& | - ^), which perform the relevant boolean operation on the paths. Use the algorithm from CGAL or devise a new robust algorithm.
- stroke(double line_width, LineJoin join, LineCap cap, double miter_limit), which performs the stroke-to-path operation.
- stroke(double line_width, LineJoin join, LineCap cap, double miter_limit, std::vector<double> const &dasharray), which performs stroke-to-path with dashing.
- Improve the performance of layer visibility: Right now, toggling layer visibility causes massive changes in the display tree, because the entire toggled layer is invalidated at the XML level. This results in very bad performance for an action which should nearly instantaneous. Improve the control flow so that only the visibility of the object representing the layer is turned off, but the remainder of the display and object tree is leaved alone.
- Robust ID handling: Currently ID clash resolution is implemented as a giant switch over object types, listing every possible dependency. Replace this with virtual methods on objects, which provide information on what each object refers to. Improve behavior when a dependency of an object is deleted, and when IDs are changed / deleted from the XML editor.
- Replace the print functions in the SPxxx classes with a generic "Visitor" pattern and port at least one export type (e.g. EMF, PDF, PS) to the new routines.
- Shape manipulators: The idea here is to rewrite shape tools in the same paradigm as the node tool. Instead of storing all information about the shape in knots which differ only by their callbacks, allow to store information in a higher-level manipulator object. This would enable things like dragging the side of a rectangle, consistent outlining / update preferences for all shapes, and editing more than one shape at once.
- Transformation Anchors
- Extend the Symbols dialog to include generic objects.
- Connector tool improvements - Expose new libavoid functionality: orthogonal routing, connector ports, curved connectors. (Mentor: Michael Wybrow)
- Fillet/Chamfer tool
- Provide more actions in the context menu depending on the content of the selection, e.g. show "Put on Path", "Flow into Frame" etc. when the selection contains the appropriate objects.
- When right-clicking a control point, show a transient dialog which would allow one to key in its coordinates.
- Provide a way to resize the page directly on the canvas, instead of keying in numbers in the Document Properties dialog.
Project infrastructure and platform support
- Migrate argument parsing to GOption and remove the dependency on popt. Update the devlibs version of Glib to one where this bug is fixed: . Once this is done, port argument parsing to GOption.
- Common build system for all platforms: Migrate the build system to Waf for all platforms. Alternatively, if there are important technical reasons why Waf is not suitable, port all necessary features to the CMake build system and remove Autotools.
- GTK3 on Windows: Rebuild the Windows devlibs so that they contain GTK3. Make the Windows port work with them, possibly sending the appropriate patches to the GTK maintainers.
- ICC Color Management for cairo outputs - Would allow Inkscape to produce CMYK PDFs and PSs with Cairo.
- Box blur: Currently we always use a very accurate method to compute the Gaussian blur filter. Add an alternate method which approximates Gaussian blur using three stacked box blurs (simple averages). This is detailed in the SVG 1.1 SE specification.
- Pluggable renderers - allow writing rendering backends which use something other than Cairo, e.g, OpenGL, Skia, Mozilla Azure or GEGL.
- OpenGL renderer - implement an OpenGL 3.x+ canvas which would render Beziers using this method: http://http.developer.nvidia.com/GPUGems3/gpugems3_ch25.html Investigate whether this generalizes to S-basis and circular arcs. Since the described method does not handle stroking, this work depends on implementing boolean operations and stroking. Also check how OpenGL path rendering is implemented in Qt, since apparently the performance there is very good. http://zrusin.blogspot.com/2011/09/nv-path-rendering.html
Better SVG standard coverage
- Full SVG viewbox support
- Multiple Page support
- Improve SVG compliance. Current status of W3C test suite compliance.
SVG 2 and CSS3
This includes providing suitable GUI and SVG 1.1 fallbacks.
- Filling and Stroking
- Paint servers
Note: Some of the above items are somewhat low hanging fruit and would need a few of them to make a good proposal, others alone are worthy of a full GSoC project.
Improve Inkscape SVG for use on Web
A proposal should fix most if not all of these problems:
- Fix "plain" SVG to not remove <script> section, etc.
- Add option to set viewbox attribute to Document Properties.
- Easily add/edit hyperlinks.
- Better CSS support.
- Option to add title to SVG (searchability and accessibility).
- Remove XML prolog/DOCTYPE.
- Move sodipodi namespace items to Inkscape namespace.
- More Live Path Effects - There is a lengthy list of ideas to choose from here.
Please do not feel limited to the above ideas - some of our best contributions have been unique ideas that students had in mind from other sources!
For more ideas, please see https://blueprints.launchpad.net/inkscape/
Successful SOC Projects from Previous Years
- Open Clip Art Library (OCAL) Interface
- DXF Import / Export
- Support for SVG Filters
- Filter Effects
- PDF export
- Inkboard Protocol Spec / Lib Conversion
- Text Style Improvements
- PDF import
- Live Path Effects
- 3D Box Tool
- UI for SVG Filter Effects
- Raster Functionality
- Importing from, and Exporting to, a remote ccHost instance
- SVG Fonts support
- 2Geom refactoring project - port most geometry code to 2Geom
- lib2geom: interactive applications showing off the power of lib2geom
- Tech drawing abilities
- A test suite
- Node tool rewrite
- D-Bus scripting API
- Connector tool improvements
- ICC/CMYK workflow
- Cairo-based rendering
- C++ification of SP Layer
- Rendering caching
- CSS support improvements
- Usibility Improvements for Guides
- On-canvas support for Tessellations
- Creating python bindings for lib2geom
- Recolor Tool
- Improved Units Support
- Electronics CAD Support
- New From Templates Dialog
- New Raster to Vector Algorithm
- Better Support for SVG Paints
- Robust Boolean and Stroking Operations for 2Geom