Difference between revisions of "Release notes/0.92/fr"

From Inkscape Wiki
Jump to navigation Jump to search
(→‎Measure tool: Translation)
(→‎Live Path Effects: Translated first subsections)
Line 83: Line 83:
Il est à présent possible de choisir une unité de mesure pour la hauteur de ligne.
Il est à présent possible de choisir une unité de mesure pour la hauteur de ligne.


== Live Path Effects ==
== Effets de chemin interactifs (EPI) ==


* Now some suitable LPEs can be applied to clips and masks.
* Certains effets de chemin interactifs peuvent maintenant être appliqués aux découpes et aux masques.
* Helper lines come again to life.
* Les « lignes d’assistance » reviennent à la vie.
* The option to add a bend path directly was added to the pen/pencil shape combo box.
* L’option pour ajouter un chemin incurvé directement a été ajoutée à la liste déroulante des outils Stylo et Crayon.


==== Spiro Live ====
=== Spiro interactif ===
----
 
Extended video: <https://www.youtube.com/watch?v=bFakiI5f0-Y>
En vidéo : https://www.youtube.com/watch?v=bFakiI5f0-Y
 
Basé sur l’EPI Spiro, affiche désormais le résultat pendant le dessin.
* Les nœuds de '''rebroussement''' peuvent être créés en enfonçant la touche Maj.
* Lorsque vous ajoutez un chemin en mode rebroussement ou Spiro, le chemin d’aperçu est affiché.


Based upon Spiro Live Path Effect, now shows the result while drawing.
* '''Cusp''' nodes can be created by holding down the Shift key.
* When you append a path in cusp and Spiro mode, the helper preview path will be displayed.
[[File:Spirolive.gif]]
[[File:Spirolive.gif]]


==== BSpline ====
=== B-spline ===
----
 
Extended video https://www.youtube.com/watch?v=vwV0DHvA-OE
En vidéo : https://www.youtube.com/watch?v=vwV0DHvA-OE
=====Pen & Node mode=====
 
Uses the '''BSpline Live Path Effect''' while creating and editing paths.
==== Outils Nœuds et Stylo ====
* Works with Pen and Pencil tool directly.
 
* Create '''cusp''' nodes by holding down the Shift key (Pen/Bézier tool only).
Utilisent l’'''EPI B-spline''' en créant et modifiant des chemins.
* When a path is appended, a preview helper path will also be shown.
* Fonctionne directement avec les outils Stylo et Crayon.
* Hold down Shift key and drag on a handle to change the '''weight''' of a bspline in node tool.
* Avec l’outil Stylo, enfoncez Maj pour créer des nœuds de '''rebroussement'''.
* Custom '''weight steps''' are applied by holding '''CTRL''' down and dragging on a handle with the node tool (no Shift key required).
* Lorsqu’un chemin est ajouté, un chemin d’aperçu sera également affiché.
* Double-click on a handle resets weight to default
* Enfoncez Maj et déplacez une poignée pour changer le '''poids''' d’une B-spline avec l’outil Nœuds.
* Des '''incréments de poids''' sont utilisés lorsque Ctrl est enfoncé est qu’une poignée est déplacée avec l’outil Nœuds (pas besoin de Maj).
* Double-cliquez sur une poignée pour réinitialiser son poids à la valeur par défaut.


[[File:Bspline.gif]] [[File:Bspline2.gif]]
[[File:Bspline.gif]] [[File:Bspline2.gif]]


=====Live Path Effect mode=====
==== Outil Effet de chemin interactif ====
 
[[File:Bspline3.gif|170px|right|thumb]]
[[File:Bspline3.gif|170px|right|thumb]]
The options in the Live Path Effect dialog give you full control over bspline paths.
* Option to set to '''Default weight''' (0.3333 times curve segment)
* Option to make nodes '''cusp'''
* Numeric input for '''weight'''
* Option to set number of '''Steps with CTRL''' to quickly snap the weight in node/handle editing
* '''Apply changes if weight ...''' applies changes in the widgets to all nodes with weight == 0 or weight > 0 or both, for example, retains cusp nodes when you change the weight and have unselected "Apply changes if weight == 0".
* '''Change only selected nodes''' applies to all other widgets changes.
* Shows a '''helper path''' with the final shape and the generated new nodes.


==== Roughen ====
Les options du panneau Effet de chemin interfactif offrent un contrôle complet sur les chemins B-spline.
----
* Option pour utiliser le '''Poids par défaut''' (0,3333 fois le segment incurvé).
* Option pour transformer les nœuds en '''points de rebroussement'''.
* Champ pour saisir le '''poids''' au clavier.
* Option pour définir la taille des '''incréments avec Ctrl''' pour définir rapidement des poids précis en édition de nœuds/poignées.
* '''Appliquer les changements si le poids…''' applique les changements saisis dans le formulaire à tous les nœuds de poids nul, supérieur à zéro ou les deux ; par exemple, conserve les points de rebroussement lorsque vous modifiez le poids et avez désélectionné « Appliquer les changements si le poids = 0 ».
* '''Ne changer que les nœuds sélectionnés''' s’applique pour tous les autres changements saisis.
* Affichage d’un '''chemin d’assistance''' avec la forme finale et les nouveaux nœuds générés.
 
=== Agitation ===
 
[[File:Roughen.png|170px|right|thumb]]
[[File:Roughen.png|170px|right|thumb]]


Extended video: https://www.youtube.com/watch?v=130Dbt0juvY
En vidéo : https://www.youtube.com/watch?v=130Dbt0juvY


This path effect is a semi-clone of two extensions, ("add nodes" and "jitter nodes") and handles units.
Cet effet de chemin est un semi-clone de deux extensions : « ajouter des nœuds » et « éparpiller les nœuds » et permet d’utiliser des unités.


The parameters are similar to both extensions and adds a global randomizer.
Les paramètres sont similaires à ceux des deux extensions et comprennent en plus un taux d’aléatoire global.


* Can be applied to paths, shapes and groups.
* Peut être appliqué aux chemins, formes et groupes.
* Can be applied to clips and masks, if they are vector objects.
* Peut être appliqué aux découpes et aux masques s’il s’agit d’objets vectoriels.


[[File:Roughen.gif]]
[[File:Roughen.gif]]


==== Simplify ====
=== Simplify ===
----
 
[[File:Simplify.png|170px|thumb|right]]
[[File:Simplify.png|170px|thumb|right]]


Line 154: Line 159:
This path effect can optionally be applied directly via the pencil/freehand drawing tool's tool bar when creating a new path. It then replaces the normal smoothing (which would be a destructive operation).
This path effect can optionally be applied directly via the pencil/freehand drawing tool's tool bar when creating a new path. It then replaces the normal smoothing (which would be a destructive operation).


==== Perspective/Envelope ====
=== Perspective/Envelope ===
----
 
[[File:Perspective-envelope.png|170px|thumb|right]]  
[[File:Perspective-envelope.png|170px|thumb|right]]  
Extended video: https://www.youtube.com/watch?v=CjKGatyxTZ8
Extended video: https://www.youtube.com/watch?v=CjKGatyxTZ8


Line 163: Line 169:
* Can be used on paths, shapes and groups.
* Can be used on paths, shapes and groups.
* Also works with vector clips and masks.
* Also works with vector clips and masks.
[[File:Perspective-envelope.gif]]
[[File:Perspective-envelope.gif]]


==== Lattice Deformation 2 ====
=== Lattice Deformation 2 ===
----
 
[[File:Latice2.png|170px|thumb|right]]
[[File:Latice2.png|170px|thumb|right]]
Extended video: https://www.youtube.com/watch?v=YlK9L88_tWE<br />
Extended video: https://www.youtube.com/watch?v=YlK9L88_tWE<br />
Symmetry video: https://www.youtube.com/watch?v=jhuVjqFA6ig
Symmetry video: https://www.youtube.com/watch?v=jhuVjqFA6ig
Line 178: Line 186:
[[File:Latice2.gif]]
[[File:Latice2.gif]]


==== Show Handles ====
=== Show Handles ===
----
 
[[File:ShowHandles.png|170px|thumb|right]]
[[File:ShowHandles.png|170px|thumb|right]]
Extended video: https://www.youtube.com/watch?v=h9ul_PR9XYo
Extended video: https://www.youtube.com/watch?v=h9ul_PR9XYo


Line 191: Line 200:
[[File:ShowHandles.gif]]
[[File:ShowHandles.gif]]


==== Transform by two points ====
=== Transform by two points ===
 
[[File:TransformByTwoKnots.png|170px|thumb|right]]
[[File:TransformByTwoKnots.png|170px|thumb|right]]
Extended video: https://www.youtube.com/watch?v=ZLmYdWoXXIw<br />
Extended video: https://www.youtube.com/watch?v=ZLmYdWoXXIw<br />
Extended video (Elastic rubber): https://www.youtube.com/watch?v=lOWTeZC_LjM
Extended video (Elastic rubber): https://www.youtube.com/watch?v=lOWTeZC_LjM
Line 207: Line 218:
[[File:TransformByTwoKnots.gif]]
[[File:TransformByTwoKnots.gif]]


==== Rotate copies ====
=== Rotate copies ===
 
[[File:RotateCopies.png|170px|thumb|right]]
[[File:RotateCopies.png|170px|thumb|right]]
Extended video (partial fuse path): https://www.youtube.com/watch?v=UpI8gRbkTu4<br />
Extended video (partial fuse path): https://www.youtube.com/watch?v=UpI8gRbkTu4<br />
Extended video (live editing): https://www.youtube.com/watch?v=fBQpvfgT4mE<br />
Extended video (live editing): https://www.youtube.com/watch?v=fBQpvfgT4mE<br />
Extended video (kaleidoscope): https://www.youtube.com/watch?v=LfMixSKy3Eo<br />
Extended video (kaleidoscope): https://www.youtube.com/watch?v=LfMixSKy3Eo


Arranges identical elements dynamically on an arc or circle.
Arranges identical elements dynamically on an arc or circle.
Line 220: Line 233:
* Live editing.
* Live editing.


==== Mirror Symmetry ====
=== Mirror Symmetry ===
 
Extended video: https://www.youtube.com/watch?v=m1sj4AeU3Yo<br />
Extended video: https://www.youtube.com/watch?v=m1sj4AeU3Yo<br />
Mirrors an item dynamically.
Mirrors an item dynamically.

Revision as of 17:26, 29 October 2016

Other languages: العربية Català Česky Deutsch English Español Français Italiano 日本語 한국어 Polski Português Português do Brasil Русский Slovenčina 中文

Inkscape 0.92

(Non encore livré — AnnouncePlanning092)

Nouveautés en lumière

Sorti le « YYYY-MM-DD ».

  • La nouvelle boîte de dialogue Objet permet de sélectionner, étiqueter, masquer et verrouiller tout objet du dessin depuis une liste
  • Les ensembles de sélection permettent de « grouper » des objets indépendamment de la structure du document
  • Les guides peuvent à présent être verrouillés afin d’éviter d’être déplacés involontairement
  • Plusieurs nouveaux effets de chemin ont été ajoutés, parmi lesquels Enveloppe/Perspective, Déformation par grille, Copies en miroir et tournées
  • Il y a plusieurs nouvelles extensions (par ex. une extension de motif sans couture) et un nouveau filtre (simulation de couleurs pour daltoniens) inclus dans la version ; de nombreuses anciennes extensions ont été mises à jour et ont obtenu de nouvelles fonctionnalités
  • De nombreuses propriétés SVG 2 et CSS 3 sont à présent supportées pour le rendu (par ex. paint-order, mix-blend-mode)
  • Les outils Aérographe et Mesurer ont acquis un lot de nouvelles fonctionnalités très pratiques
  • Les lignes créées avec l’outil Crayon sont lissées interactivement
  • Les B-splines (et plus) sont disponibles avec l’outil Stylo
  • Un arrière-plan en damier peut être utilisé pour déterminer plus aisément les objets transparents

Manipulation d’objets

Boîte de dialogue Objet

Nouvelle boîte de dialogue pour manipuler l’arborescence d’objets.

  • Glisser-déposer pour ordonner les objets.
  • Verrouiller et masquer un ou plusieurs éléments.
  • Utiliser Ctrl+F pour rechercher un élément.
  • Sélectionner un ou plusieurs objets du dessin.
  • Afficher des objets individuels comme des calques.
  • Possibilité de changer la couleur de surbrillance des objets.
  • Possibilité de définir le mode de mélange pour chaque objet.

Importé depuis Ponyscape.

Boîte de dialogue Ensembles de sélection

Nouvelle boîte de dialogue qui permet de créer des ensembles de sélection qui ne sont pas affectés par la structure du document.

Utilisation :

  • Ouvrir la boîte de dialogue avec Objet > Ensembles de sélection
  • Pour créer un nouvel ensemble de sélection :
  1. Cliquer sur le bouton « + » en bas du panneau pour créer un nouvel ensemble de sélection (double-cliquer sur son libellé pour le modifier)
  • Pour ajouter des objets à un ensemble de sélection :
  1. Sélectionner les objets sur le canevas
  2. Dans le panneau « Ensembles de sélection », cliquer sur l’icône « + » avant l’ensemble de sélection dans la liste
  • Pour sélectionner tous les objets d’un ensemble de sélection :
  1. Tout désélectionner puis cliquer sur l’ensemble de sélection dans la liste
  • Pour retirer un objet d’un ensemble de sélection :
  1. Sélectionner l’ensemble de sélection dans le panneau
  2. Cliquer sur « Éléments » pour afficher tous les objets de l’ensemble
  3. Sélectionner un objet sur le canevas ou la liste d’éléments dans le panneau
  4. Cliquer sur l’icône « Supprimer » (poubelle) à côté de l’objet dans la liste
  • Pour supprimer un ensemble de sélection, le sélectionner dans la liste et cliquer sur le bouton « − » en bas du panneau

Texte

Polices de caractères

Il est dorénavant possible d’utiliser les tables OpenType pour choisir des glyphes alternatifs à partir d’une police de caractères. À noter toutefois que le support par les navigateurs reste limité. Inkscape doit également être lié à une version récente de la bibliothèque Pango.

Texte vertical

Le support du texte vertical a été amélioré.

  • Le comportement par défaut pour les glyphes de caractères latins a été changé. Ils sont à présent tournés de côté comme spécifié dans le standard SVG 1.1.
  • Le support de la propriété CSS 3 « text-orientation » a été ajouté (notez que cette propriété n’est pas encore entièrement prise en charge par les navigateurs).
  • Les valeurs CSS 3 pour la propriété « writing-mode » sont supportées pour le rendu. L’enregistrement utilise toujours les valeurs SVG 1.1 dépréciées.

Accessibilité

Convertir du texte en chemin enregistrera le texte dans l’attribut « aria-label ». Cela peut permettre aux outils d’accessibilité de s’en servir et pourra peut-être être utilisé par Inkscape pour reconstruire le texte.

Autre

Il est à présent possible de choisir une unité de mesure pour la hauteur de ligne.

Effets de chemin interactifs (EPI)

  • Certains effets de chemin interactifs peuvent maintenant être appliqués aux découpes et aux masques.
  • Les « lignes d’assistance » reviennent à la vie.
  • L’option pour ajouter un chemin incurvé directement a été ajoutée à la liste déroulante des outils Stylo et Crayon.

Spiro interactif

En vidéo : https://www.youtube.com/watch?v=bFakiI5f0-Y

Basé sur l’EPI Spiro, affiche désormais le résultat pendant le dessin.

  • Les nœuds de rebroussement peuvent être créés en enfonçant la touche Maj.
  • Lorsque vous ajoutez un chemin en mode rebroussement ou Spiro, le chemin d’aperçu est affiché.

Spirolive.gif

B-spline

En vidéo : https://www.youtube.com/watch?v=vwV0DHvA-OE

Outils Nœuds et Stylo

Utilisent l’EPI B-spline en créant et modifiant des chemins.

  • Fonctionne directement avec les outils Stylo et Crayon.
  • Avec l’outil Stylo, enfoncez Maj pour créer des nœuds de rebroussement.
  • Lorsqu’un chemin est ajouté, un chemin d’aperçu sera également affiché.
  • Enfoncez Maj et déplacez une poignée pour changer le poids d’une B-spline avec l’outil Nœuds.
  • Des incréments de poids sont utilisés lorsque Ctrl est enfoncé est qu’une poignée est déplacée avec l’outil Nœuds (pas besoin de Maj).
  • Double-cliquez sur une poignée pour réinitialiser son poids à la valeur par défaut.

Bspline.gif Bspline2.gif

Outil Effet de chemin interactif

Bspline3.gif

Les options du panneau Effet de chemin interfactif offrent un contrôle complet sur les chemins B-spline.

  • Option pour utiliser le Poids par défaut (0,3333 fois le segment incurvé).
  • Option pour transformer les nœuds en points de rebroussement.
  • Champ pour saisir le poids au clavier.
  • Option pour définir la taille des incréments avec Ctrl pour définir rapidement des poids précis en édition de nœuds/poignées.
  • Appliquer les changements si le poids… applique les changements saisis dans le formulaire à tous les nœuds de poids nul, supérieur à zéro ou les deux ; par exemple, conserve les points de rebroussement lorsque vous modifiez le poids et avez désélectionné « Appliquer les changements si le poids = 0 ».
  • Ne changer que les nœuds sélectionnés s’applique pour tous les autres changements saisis.
  • Affichage d’un chemin d’assistance avec la forme finale et les nouveaux nœuds générés.

Agitation

Roughen.png

En vidéo : https://www.youtube.com/watch?v=130Dbt0juvY

Cet effet de chemin est un semi-clone de deux extensions : « ajouter des nœuds » et « éparpiller les nœuds » et permet d’utiliser des unités.

Les paramètres sont similaires à ceux des deux extensions et comprennent en plus un taux d’aléatoire global.

  • Peut être appliqué aux chemins, formes et groupes.
  • Peut être appliqué aux découpes et aux masques s’il s’agit d’objets vectoriels.

Roughen.gif

Simplify

Simplify.png

Extended video: https://www.youtube.com/watch?v=gaWujN_iTSk

Simplifies a vector element using a non-destructive live path effect.

  • Can be used on paths, shapes and groups of these.
  • Can be applied to clips and masks, if they are vector objects
  • The effect's threshold can be modified in the preferences dialog, by setting a numeric parameter.
  • Apply Simplify multiple times in the same LPE.

Simplify.gif

This path effect can optionally be applied directly via the pencil/freehand drawing tool's tool bar when creating a new path. It then replaces the normal smoothing (which would be a destructive operation).

Perspective/Envelope

Perspective-envelope.png

Extended video: https://www.youtube.com/watch?v=CjKGatyxTZ8

Both deformations can be applied by specifying 4 points.

  • Two modes, perspective and envelope
  • Can be used on paths, shapes and groups.
  • Also works with vector clips and masks.

Perspective-envelope.gif

Lattice Deformation 2

Latice2.png

Extended video: https://www.youtube.com/watch?v=YlK9L88_tWE
Symmetry video: https://www.youtube.com/watch?v=jhuVjqFA6ig

  • Deforms an object by 25 handles arranged in a mesh
  • Optionally deforms symmetrically along vertical or horizontal axis or both.
  • Can be applied to paths, shapes and groups.
  • Also works on vector clips and masks.

Latice2.gif

Show Handles

ShowHandles.png

Extended video: https://www.youtube.com/watch?v=h9ul_PR9XYo

An LPE version of the Show Handles extension.

  • Works on paths, shapes and groups.
  • Works on clones.
  • Node and Handle shapes are resizeable
  • If not applied to a clone, this is a destructive LPE, it does not save styles, better work on a copy!

ShowHandles.gif

Transform by two points

TransformByTwoKnots.png

Extended video: https://www.youtube.com/watch?v=ZLmYdWoXXIw
Extended video (Elastic rubber): https://www.youtube.com/watch?v=lOWTeZC_LjM

Transforms an element by two control points (e.g. moving, skewing, resizing and rotation). You can position the control points on the bounding box edge midpoints or by the index of the nodes of the original path. Thanks to Ivan Louette for the idea for this effect!

  • Works on paths, shapes. With groups you have limited features constrained to bounding box.
  • Allows snapping of both control points.
  • Allows to fix angle or distance.
  • Elastic mode to simulate a rubber band path.
  • Two bounding box edge midpoints can be used as control points if 'From original width' is active.

TransformByTwoKnots.gif

Rotate copies

Extended video (partial fuse path): https://www.youtube.com/watch?v=UpI8gRbkTu4
Extended video (live editing): https://www.youtube.com/watch?v=fBQpvfgT4mE
Extended video (kaleidoscope): https://www.youtube.com/watch?v=LfMixSKy3Eo

Arranges identical elements dynamically on an arc or circle.

  • Works on paths, shapes and groups of paths.
  • Allows to fuse the result to create kaleidoscope-like effects
  • Allows to arrange the copies on an arc when the 360° copies checkbox is not checked.
  • Live editing.

Mirror Symmetry

Extended video: https://www.youtube.com/watch?v=m1sj4AeU3Yo
Mirrors an item dynamically.

  • Works on paths, shapes and groups.
  • Allows to fuse the result.
  • Different mirror lines: Free, bounding box center X, bounding box center Y, Document center X, Document center Y.

Spray tool

Extended video 1 (No overlap): https://www.youtube.com/watch?v=uehj4ATOWos
Extended video 2 (No overlap multiple items): https://www.youtube.com/watch?v=1eTG2U3qlb4
Extended video 3 (Over visible, pick color): https://www.youtube.com/watch?v=aTdKu7mAZE8
Extended video 4 (Pressure): https://www.youtube.com/watch?v=kWdQnxd_z30
Extended video 5 (Trace -clones- dialog): https://www.youtube.com/watch?v=Zn3vzf-yA_w

  • New eraser mode
  • More pressure toggles added
  • "No overlap" option with optional multiple elements
  • "No overlap" option between different background colors
  • Configurable offset for overlaps
  • Color picker from center or average area
  • Apply picked color to fill
  • Apply picked color to stroke
  • Invert picked colors
  • Spray over transparent background areas
  • Spray over non-transparent background areas
  • Makes use of "Trace the drawing" options from Tiled Clones dialog

Outil Mesurer

Vidéo de présentation : https://www.youtube.com/watch?v=OE0cVDGCzbM

  • La mesure est conservée avant qu’une nouvelle soit réalisée (visible seulement lorsque l’outil Mesurer est utilisé)
  • L’origine est l’extrémité peuvent être repositionnées
  • La mesure peut être convertie en objet ou en guides
  • La mesure de la distance peut être ajoutée en tant qu’objets : un texte éditable et une ligne allant de l’origine à l’extrémité
  • Une « mesure fantôme » peut être temporairement affichée afin de pouvoir comparer deux mesures
  • L’origine et l’extrémité peuvent être inversées
  • La mesure peut être globale ou liée au calque en cours d’utilisation
  • La précision peut être modifiée

Align and Distribute

  • NEW: drop-down chooser with options to align nodes relative to each other in node editing mode.

Import / Export

Export PDF / EPS / PS

  • The default PostScript level for exporting from the command line changes from 2 to 3 (consistent with the user interface PS exporter which defaults to level 3). Level 3 is required for gradient support.

Export Optimized SVG

  • Completely redesigned settings dialog
  • Starting with version 0.92, Inkscape uses the Scour version installed on the system (e.g. via "pip install scour") instead of a bundled version so you can always profit from the latest improvements
  • A lot of new features and fixes in the Scour module itself, check out the release notes (Scour 0.26 from 2011-05-09 was the version that has been bundled with Inkscape 0.91)

Extensions

New

  • Render > Seamless Pattern (Screencast)
  • Images > Set Image Attributes (Bug #1357808, can be used to fix the scaling problem of raster images in SVGs created with previous Inkscape versions)
  • Render > NiceCharts (github repo, not maintained)
  • Arrange > Deep Ungroup (Bug #171117)

Plotter Driver

Multiple Pens

The Plotter driver (Extensions -> Export -> Plot) can now handle multiple pens to create colorful drawings on Pen Plotters:

  • Create a layer for every pen to use and move the corresponding drawings into it
  • Name the layer with a title like "Pen 1" or "MyLayerName Pen 1", where the number corresponds to the pen number the plotter should use
  • The layer name always overrides the standard pen setting in the plot menu

Serial Connection

The connection settings now allow you to specify rarely used serial connection settings like byte size, stop bits and parity. Most plotters use the default settings, so only change these if you know what you are doing.

HPGL Export

The HPGL export (File -> Save as -> HP Grafics Language file) has now the same multiple pens feature as the #Plotter Driver.

HPGL Import

The HPGL import (File -> Open -> Select .hpgl file) can now import multiple pens into corresponding layers, see #Plotter Driver for more information.

PDF Import

The image 'interpolate' value is now used to determine how to display bitmaps (interpolated or blocky).

Miscellaneous Improvements

  • Arrange > Restack has new options to reverse and shuffle the z-order of selected objects.
  • Render > Random Tree has new option to omit redundant segments.
  • Visualize Path > Measure Path has additional text layout options.
  • Render > Barcode was updated with new EAN2 code and extended EAN13 with automatic EAN2 and EAN5 additions
  • Color > Randomize now allows to set the range for randomization, and (with some limits) can now also randomize opacity

Extension Development

  • It is now possible for an extension to retrieve a list of selected nodes (Bug #171287).

Filters

New

  • Color > Color Blindness filter allows to simulate different color blindness conditions.

Other dialogs

Document Properties: Licences

All selectable licences have been updated to most current version.

Filter Editor

Filter list now displays how often a filter is used.

Menus

  • 'Resize page to selection' added to Edit menu, shortcut: Shift+Ctrl+R

Other user interface

Node Snapping

Snapping in the node tool has been improved:

  • When double clicking to insert new nodes, the position of these new nodes will snap to for example path intersections and to path-guide intersections
  • When grabbing a segment of a path and dragging it to deform it, the pointer will now snap

Checkerboard Background

It is now possible to use a checkerboard background when editing. This allows one to clearly see the transparency of objects.

View Box

One can now set the SVG 'viewBox' attribute from the GUI. This attribute sets the scale of the drawing by determining the real-world value of the SVG user unit (pixel size).

Lock Guides

Now guides can be locked and unlocked globally or individually.

SVG and CSS

  • The 'marker-orientation' property now recognizes units ('deg', 'rad', 'grad' and 'turn').
  • The new SVG 2 'context-fill' and 'context-stroke' properties are implemented which allows the auto-matching of arrowhead fill color to path stroke color.
  • The new SVG 2 marker orientation attribute value 'auto-start-reverse' is implemented. This allows one arrow marker to be used for both ends of a path.
  • The new CSS 3 'mix-blend-mode' and 'isolation' properties are implemented, allowing setting the blend mode between objects without using filters.
  • The new SVG 2 'paint-order' property is now supported. This allows setting the order in which the fill, stroke, and markers are drawn (buttons will be available in the Fill and Stroke dialog).
  • The new SVG 2 'mesh' paint server is supported, including bicubic auto-smoothing. A primitive GUI is available.
  • The SVG 1.1 'text-decoration' property is now rendered (underlines, strike through, etc.). CSS 3 'text-decoration' properties are also rendered.
  • The new SVG 2 'hatch' paint server is now supported.
  • The CSS 'white-space' property is now supported. Use of this property was added in SVG 2 to replace the now deprecated 'xml;space' attribute.
  • The SVG 1.1 'textLength" and 'textAdjust' attributes are implemented, however, there is no GUI for these attributes.
  • Rendering of the Component Transfer filter primitive has been corrected.
  • Units are now recognized in the text and tspan 'x', 'y', 'dx', and 'dy' attributes.
  • Percentage values are now interpreted correctly for shapes.

New SVG 2 and CSS 3 features are generally not enabled in the GUI until widespread support in browsers.

New dependencies

  • The Paintbucket and Trace Bitmap tools now use an external copy of the Potrace library, which is available in many Linux distributions or can be obtained from http://potrace.sourceforge.net
  • Export to Optimized SVG now depends upon an external copy of the Scour python module, which can be obtained via pip (pip install scour), package management (version may be outdated) or from the scour project github site. For Windows versions, the module is included.

Translations

New UI translations for Assamese, Bodo, Dogri, Gujarati, Hindi, Kannada, Kashmiri (Perso-Arabic and Devanagari), Konkani (Latin and Devanagari scripts), Maithili, Malayalam, Manipuri (Meetei Mayek and Bengali scripts), Marathi, Odia, Santali (Devanagari and Ol-Chiki scripts), Sanskrit, Sindhi, Tamil, Urdu (Perso-Arabic and Devanagari scripts).

Correctifs notables

  • RÉSOLU : Problèmes de performance sévères sous Ms Windows (paquetages 64 bits) sur les installations utilisant des cartes graphiques Intel (masquer les règles permettait de contourner le problème sous Inkscape 0.91) (bogue #1351597)
  • RÉSOLU : Sous Ms Windows (paquetages 64 bits), l’impression pouvait donner des pages presque noires lorsque de l’opacité partielle est utilisée dans le document (bogue #1418865)

Problèmes connus

  • Les polices de caractères chargées par les logiciels de gestion de polices sous Windows ne peuvent pas être sélectionnés sous Inkscape (bogue #1416674)

Versions précédentes