Difference between revisions of "Compiling Inkscape on Windows 32-bit"

From Inkscape Wiki
Jump to navigation Jump to search
(The information on this page is outdated. Please see '''Compiling Inkscape on Windows''' for the updated instructions.)
 
(77 intermediate revisions by 25 users not shown)
Line 1: Line 1:
See the [http://sourceforge.net/tracker/index.php?func=detail&aid=847856&group_id=93438&atid=604308 Win32 Build ticket] for some info.
{{Note|The information on this page is outdated. Please see '''[[Compiling Inkscape on Windows]]''' for the updated instructions.}}


=== Inkscape under Windows ===
'''For 64 bit: see [[Compiling Inkscape on Windows 64-bit]]'''<br />


Inkscape was originally written for Linux, but has been ported to other platforms, including Windows, through the work of a number of dedicated developers.
----


You can get pre-built binaries of the Windows releases (both stable and development) from the [http://www.inkscape.org/download/?lang=en Inkscape download page]
Inkscape was originally written for Linux, but it has been ported to other platforms, including Windows. Since Windows is not POSIX compliant and doesn't have several features useful to developers (like package management), compiling Inkscape on Windows is more tedious than on Linux, but perfectly possible. To make it easier, we have compiled a package that contains all the libraries you need to build Inkscape. This reduces the effort of compiling Inkscape to: download and install 3 programs, download library package, download sourcecode, and you are ready to go.


==Setting up the build environment==


=== Building Your Own Binary ===
To develop Inkscape, you will need the following things:
As well as getting a pre-built binary, you can also build your own. You may do this for fun, to learn about programming, or to help test or improve Inkscape.


Several steps are required to build your own binary, as follows;
* [http://wiki.bazaar.canonical.com/WindowsDownloads Bazaar]
* You will need to download and install the MinGW compiler
* [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html PuTTY] programs: puttygen.exe and pageant.exe
* You will also need the supporting libraries used by Inkscape
* TDM's GCC (MingW): Please use exactly the [http://sourceforge.net/projects/tdm-gcc/files/TDM-GCC%20Installer/Previous/1.1006.0/tdm-gcc-4.6.1.exe/download version 4.6.1 32bit bundle installer] and follow the instructions below. In the setup, '''Uncheck''' the [''Check for updated files on the TDM-GCC server''] when installing, or it will install a newer version. Newer versions (tdm-gcc-4.7+) introduce important changes in gcc and don't work with the current Inkscape devlibs (see the [http://inkscape.13.x6.nabble.com/Compiling-on-Windows-7-x64-td4965465.html discussion on the developers' list]).
* A recommended step is to download and install the TortoiseSVN program to help manage source files and patching
* Launchpad account
* You need to download the source code and possibly apply patches if bug testing


In order to build the installer (not needed for most developers):
* [http://wixtoolset.org Windows Installer XML Toolset] for rencent msi builds
* [http://sourceforge.net/projects/nsis/files/NSIS%202/2.46/nsis-2.46-setup.exe/download NSIS 2.46]




==== Getting The Compiler & Libraries ====
===Install the compiler===
Run the TDM-MinGW installer:
# Install in a path that doesn't contain spaces. The path 'C:\mingw' is ideal beacuse it is currently set in the <tt>mingwenv.bat</tt> file (along with the location of devlibs).
#* TDM-MinGW's default install option may be to a different location. You will have to edit the <tt>mingwenv.bat</tt> file to point there.
#* If you install it into another path, set the environment variable MINGW_PATH to the TDM-MinGW installation directory, e.g. the one containing <tt>README-tdm-gcc.txt</tt> (right click My Computer -> Properties -> Advanced -> Environment Variables).
# Be sure to enable the "GCC -> openmp support" checkbox from the components list


Thanks to Ishmal, it is extremely easy to set up your system to compile Inkscape. He has made a complete set of compiler and library files available from his website - http://inkscape.modevia.com/win32libs/.
===Create your Launchpad account===
You can skip this step (or do it later) if you just want to download the sources, but not submit your changes.


Before you download, check for the latest versions. As of '''April 17 2008''' those are:
If you do not have an SSH public/private key pair to identify yourself:
* The mingw compiler version 4.2.1 http://inkscape.modevia.com/win32libs/mingw-4.2.1-071022-dw2.7z
*run the program puttygen.exe to generate an SSH key
* Other libraries http://inkscape.modevia.com/win32libs/devlibs-2.12-svn-0809052229.7z (you can also get the files using svn, located at https://svn.modevia.com/inkscape/devlibs)
*save both its parts.
Log into your Launchpad account, go to your profile page and add the public part of the generated key to the list of SSH keys. Run the program pageant.exe (you can add it to Autorun). A tray icon should appear. Right click it, select "Add Key" and pick the private key file you have just generated from the dialog. Note that you need to repeat this after every login whenever you want to access Launchpad.


The configuration files expect these packages in specific directories:
Now set up Bazaar. First tell it who you are, then associate with your Launchpad account. You need to use the account name (e.g. johnq), not the display name.(John Q. Public).
* Unzip the compiler (mingw-{version}.7z) to C:\MINGW (referenced by mingwenv.bat)
* Unzip the other libraries (devlibs-{version}.7z) to C:\DEVLIBS (referenced in build.xml used by buildtool)


==== Getting The Inkscape Source ====
C:\> bzr whoami "''Your Name'' <''your_real_email@example.com''>"
The best way to get the source is straight from the SVN repository using the TortoiseSVN program. Follow these steps;
C:\> bzr launchpad-login "''your_launchpad_account''"


'''''Setting up a local source repository:'''''
===Error messages using Bazaar===
* Get TortoiseSVN from http://tortoisesvn.net/downloads
If you are seeing this error message in your Windows console:
* Install Tortoise SVN.
* Once Tortoise is installed, make a working folder wherever you want.
* Inside the working folder, right click and select ''TortoiseSVN'' -> ''Create repository here''. This will make a bunch of folders inside your working folder.
* Now make another folder in the working folder called 0.46branch or whatever else you'd like to call it. This will hold the source files.


'''''Getting the source:'''''
          Connected (version 2.0, client Twisted)
* Enter the folder you created for the source files. Right click and select ''SVN Checkout''.
              bzr: ERROR: Connection error: Unable to authenticate to SSH host as
* Enter the URL for the source code you want;
                <email address hidden>
** For the 0.46 release branch, use https://inkscape.svn.sourceforge.net/svnroot/inkscape/inkscape/branches/RELEASE_0_46_BRANCH/ (This branch of the source is frozen for the 0.46 release. New features are not allowed in order to focus on bug fixing. This is what you need to test for bugs in the 0.46 release.)
              supported auth types: ['publickey']
*** To get this to work with the libraries above, I had to edit build-dw2.xml and build.xml and replace the instances (1 per file) of libpoppler-2.dll with libpoppler-3.dll. It compiles without the changes, but won't run. (Compiling/Running on Vista).
** For the 0.47 development branch (trunk), use https://inkscape.svn.sourceforge.net/svnroot/inkscape/inkscape/trunk/ (This branch of the source is for ongoing development and includes new and experimental features not in the 0.46 release branch. It is slowly diverging from the 0.46 release branch, thus becoming progressively less useful for testing bugs in the 0.46 release.)
* TortoiseSVN will now download the source files, which are just over 30Mb.


'''''Notes:'''''
Please make sure to check [https://help.launchpad.net/YourAccount/CreatingAnSSHKeyPair: Creating An SSH Key Pair] and make sure you setup your key pair correctly (pageant.exe, puttygen.exe and plink.exe).
* You can also get a zipped up version of the trunk (0.47 dev) from Ishmal's site - http://inkscape.modevia.com/svn-snap/


==== Patching The Source Code ====
===Install the developer libraries===
Check out Inkscape Devlibs into C:\devlibs. If you check them out elsewhere, set the environment variable DEVLIBS_PATH to the path where they are. Devlibs are a bundle of all the libraries needed to compile Inkscape. If you experience any problems, make sure you have an up to date copy of those libraries and an up to date checkout of Inkscape source. To reduce the size of the download, pass the <tt>--lightweight</tt> parameter.


'''''Using TortoiseSVN:'''''
C:\> bzr checkout --lightweight lp:inkscape-devlibs devlibs


Tortoise makes patching quite easy. Follow these steps;
To update devlibs:


1. Find your patch. Windows Patches to the main SVN are now being kept in a folder under your main working directory called ''packaging\win32\patches''. If you download or make a subsequent patch, put it in this directory to keep things orderly. It should be called {patchname}.patch or {patchname}.diff
C:\devlibs> bzr update


2. Right click on the patch, and select ''TortoiseSVN'' -> ''Apply Patch...''. Because the Windows patches are kept a little tucked away, Tortoise will probably give a message; '''The path {working directory}\packaging\win32\patches seems not to match the paths in the patchfile. But Tortoise found the path {working directory} matches it better. Do you want to use the suggested path instead?''' Click ''Yes'' to proceed.
All Inkscape developers can commit to the devlibs trunk. Advanced information about Devlibs, mainy useful when you want to update them to newly released versions of upstream libraries, is available here: [[Inkscape Devlibs]].
You can see some infomation from [https://launchpad.net/inkscape-devlibs launchpad:inkscape-devlibs] and [http://bazaar.launchpad.net/~inkscape.dev/inkscape-devlibs/trunk/files trunk/files].


3. Now comes the actual patching process. See the Tortoise website for an explanation of how to use the merge tool - http://tortoisesvn.net/docs/release/TortoiseMerge_en/tmerge-dug.html#tmerge-dug-open-view (see also the following pages)
=== Obtaining Inkscape source code ===


4. Once patched, you will now notice that the patched file has a red exclamation rather than a green tick, as do its parent folders. This signifies that it has been altered from the SVN version, and helps you find altered files really quickly.
You can obtain released Inkscape source from a tarball. Since version 0.47 they are hosted on [https://launchpad.net/inkscape Inkscape's Launchpad page]. There are ready-made installers provided, so there's usually little reason to compile the stable version yourself.


5. If you want to go back to the SVN version you originally ''checked out'', simply right click on an individual file or a whole folder and select ''TortoiseSVN'' -> ''Revert''. This will bring up a list of files that can be reverted. If you only selected one file, only that will be available to revert. If you selected a folder, all the modified files in that folder will be available to revert. Tick only those you wish to revert to the SVN version last checked out.
To obtain cutting edge code, check out Inkscape source from the Bazaar repository. You can also use the TortoiseBZR shell extensions to do this. The recommended way is to first create a shared repository, then check out the Inkscape branch into that shared repository. Using this setup, branching will be a lot faster.


'''''Notes:'''''
C:\src\inkscape> bzr init-repo --rich-root .
* When applying several patches at once, you will possibly find that some patches update the same code modules. This is normal, and Tortoise can help you compare files and resolve conflicts. See the [http://tortoisesvn.net/docs/release/TortoiseMerge_en/tmerge-dug.html#tmerge-dug-open-view link mentioned above] to learn more.
C:\src\inkscape> bzr upgrade
* Sometimes conflicts are not able to be resolved using Tortoise, and you will need to edit the files by hand. Don't worry, you can always ''revert'' the files if you make a mistake. A good text editor to help is Notepad 2 - http://www.flos-freeware.ch/
C:\src\inkscape> bzr checkout lp:inkscape trunk
* If you edit the source files yourself, Tortoise will register that the files are changed with an exclamation mark. To create your own patch from a changed file, right click on the ''src'' directory folder that contains your changed file, then select ''Tortoise SVN -> Create Patch''. Now tick only the file/s you edited and save the patch file. This can be posted to a bug report as a test, and possibly committed to SVN if your patch works.


If you don't want to create any branches, you can skip the shared repository step.


C:\src> bzr checkout lp:inkscape


'''IMPORTANT:''' make sure that the path to your Inkscape source checkout does not contain spaces. Unix tools do not like them and you will end up with a lot of error messages about missing files.


'''''Using the GNU patch program:'''''
== Building ==
=== Environment variables ===
Edit the file <code>mingwenv.bat</code> in the root directory of the Inkscape source to match you local paths. Most importantly the two lines:


For those who love the command line, you can patch the hard way using the GNU patch program.
<pre>
# Path to the Inkscape development libraries.
if "%DEVLIBS_PATH%"=="" set DEVLIBS_PATH=c:\devlibs


* Download the program from here  - http://gnuwin32.sourceforge.net/packages/patch.htm
# Path to the MinGW installation. Note: MinGW does not work with white spaces in the path name.
* Put the patch program wherever you like, as it works independently from the compiler.
if "%MINGW_PATH%"=="" set MINGW_PATH=c:\mingw
* If the patch file refers to the location in its header, put it in the /src directory and then patch, otherwise put it in the same directory as the file to be patched
</pre>
* In a command window, type something like the following;
    ...>patch --binary {''modulename''}.cpp {''modulename''}.cpp.patch
* You should now have a patched code module to copy back to the same spot in the source tree.
* The ''--binary'' switch is only necessary if the files contain the wrong sort of line endings. The [http://gnuwin32.sourceforge.net/packages/patch.htm GnuWin32 Patch page] notes the following; ''"On MS-Windows, the patch file must be a text file, i.e. CR-LF must be used as line endings. A file with LF may give the error: "Assertion failed, hunk, file patch.c, line 343," unless the option '--binary' is given."''


==== Building The Binary ====
should point to the folders containing MinGW and the inkscape-devlibs.


Before you begin, it might be an idea to temporarily lower the level of any over zealous security software, screen savers or other background programs that chew a lot of processor power when the computer is not attended. These programs can interfere with the build process, and cause you to have to start again.
Whenever you want to build Inkscape open a command prompt (<code>cmd.exe</code>), change into the root directory of the Inkscape source and set the environment variables with the following command:


<pre>
mingwenv.bat
</pre>


'''''Doing A New Build'''''
=== Compiling Inkscape using CMake ===


You will need to open a command window (DOS prompt) to build the binary. Go to the Start Menu, select Run, and then type command (or cmd). Now you need to step into the Inkscape source directory:
''Note: To significantly reduce the time needed for incremental rebuilds consider [[CMake#Using CMake with Ninja to build Inkscape|using CMake in combination with Ninja]].''
    ...\> cd ...\inkscape


Firstly run the batch file that sets up the MinGW environment variables
Go to the directory containing your Inkscape source and create the build output directory. In example:
    ...\> mingwenv.bat
You can usually just type mingwenv (enter) and Windows will execute the batch file.


Now, build the build tool:
<pre>
    ...\> g++ buildtool.cpp -o btool
mkdir build
or, if you get errors about gettimeofday:
cd build
    ...\> g++ -DNEED_GETTIMEOFDAY buildtool.cpp -o btool
</pre>


You can also create an out of source build anywhere else in your file system. Just make sure that you pass the correct path to the source code directory in the next step. Create the makefiles using CMake:


Now you can start the build process by simply running btool.
<pre>
    ...\> btool
# Pass the path to the source code directory as a parameter.
cmake -G "MinGW Makefiles" ..
</pre>


Grab a coffee and find something else to do. On an AMD-64 3000+ 1Gb it takes about 70 minutes, but your mileage may vary. The build process can normally continue in the background while you're doing other stuff on your PC.
Start the build process. The compiled Inkscape.exe will be in bin directory afterwards:


If everything went well, you should now have you fresh Inkscape in the ...\Inkscape directory.
<pre>
# 2 is the number of parallel threads to use for compiling. Increase the number to utilize more of your available CPU cores.
mingw32-make -j 2
</pre>


''Note: The version of mingw32-make included in TDM GCC 4.6.1 (this is what you should be using when building 32-bit Inkscape) does not have jobserver support, yet. As CMake makes use of recursive make calls the <code>-j</code> option won't have any effect on the recursively spawned instances. You can work around this by executing <code>set MAKE=mingw32-make -j 2</code> before starting the compilation process (this will make each spawned instance use up to 2 jobs).''


Collect all the needed files and create a selfcontaing directory in  <code>./build/inkscape/</code>:


'''''Re-building after modifying source modules'''''
<pre>
mingw32-make install
</pre>


If you've already built the source once and done a few changes to source code files, you can do a quick rebuild using many of the files already compiled in the ''build'' directory. Only those that need to be rebuilt will be, and the ''btool'' program automatically figures that out. It will then 'link' the relevant files together and copy them into the ''inkscape'' directory.
As cmake hides the actual compiler calls, here is a way how to see what make is doing.


To do a quick rebuild, simply go to the directory that contains the source and do the following;
<pre>
mingw32-make VERBOSE=1 -j 2
</pre>


* Delete or rename the ''inkscape'' directory, which contains the previous fully built and linked version of Inkscape
; If something goes wrong
* Now open a command window and run the following;
Execute the following commands from the <code>build</code> directory
    ...> mingwenv
<pre>
    ...> btool
rm -r CMakeFiles
* Ishmal's build tool should now rebuild the individual files that have changed, along with any extra 'dependencies' these might require. If you've only applied one new patch, it can be done in less than 5 minutes!
rm CMakeCache.txt
</pre>
and start with running CMake (see above) again.


; If something goes very wrong
Remove the <code>build</code> directory and start over.


'''''Note:''''' It is best not to do a quick rebuild if you have changed the version of libraries in C:\DEVLIBS. This can cause problems, as the files in the ''build'' directory incorporate functions from these libraries, which can change significantly between library versions. You will need to rebuild from scratch (see below).
=== Compiling Inkscape using btool (deprecated) ===


''Note: This method was the default up to Inkscape 0.91. It still works in 0.92 but compiling using CMake [[#Compiling Inkscape using CMake|as described above]] is the preferred option.''


Now compile the build tool with the following command:


'''''Rebuilding From Scratch'''''
C:\src\inkscape\trunk> g++ buildtool.cpp -o btool -fopenmp


To rebuild from scratch, you need to clean out any build files. First of all, if you want to keep the previously built version, rename the ''inkscape'' directory. Now open a command window and run the following;
The <code>-fopenmp</code> flag enables [https://gcc.gnu.org/wiki/openmp OpenMP] which allows to use parallel compilation threads when building Inkscape.
    ...> mingwenv
 
    ...> btool clean
==== Building Inkscape ====
    ...> btool
 
Finally initiate the compilation. Get a coffee or take your dog out for a walk, because it will take a rather long time. If you have a multicore processor, add "-j 8" to use (for example) 8 parallel compilation threads.
 
C:\src\inkscape\trunk> btool -j 8
 
Once everything is done, there should be an <tt>inkscape</tt> directory that contains the Inkscape executable and libraries needed to run it.
 
==== Rebuilding ====
 
If you have only changed a few files and want to rebuild, delete the <tt>inkscape</tt> directory and run <tt>btool</tt> again.
 
To rebuild from scratch, execute the following sequence of commands:
C:\src\inkscape\trunk> btool clean
C:\src\inkscape\trunk> btool


==== Dealing With Build Errors ====
==== Dealing With Build Errors ====
Feel free to add any questions or answers you have in here;
Feel free to add any questions or answers you have in here;


'''Q''' - My firewall software (Comodo's Defense+ component or similar) stopped the process continuing to the next step in the build, because I wasn't there to permit an action and it timed out. What can I do?
'''Q''' - My firewall software (Comodo's Defense+ component or similar) stopped the process continuing to the next step in the build, because I wasn't there to permit an action and it timed out. What can I do?
Line 183: Line 216:
'''A''' - Do not leave anything with a suffix .cpp in the source directories, apart from the original (or patched) source files. The build tool will try to compile everything ending in .cpp and will complain. If you backup an old file in the same directory before patching, call it {filename}.cpp.old or similar.
'''A''' - Do not leave anything with a suffix .cpp in the source directories, apart from the original (or patched) source files. The build tool will try to compile everything ending in .cpp and will complain. If you backup an old file in the same directory before patching, call it {filename}.cpp.old or similar.


==== For more information ====
 
 
'''Q''' - I think I followed the instruction above. What could have caused the compiling error like this for src/extension/internal/pdfinput/pdf-parser.cpp?
 
    src/extension/internal/pdfinput/pdf-parser.cpp:2248: error: no matching function for call to 'GfxFont::getNextChar(char*&, int&, CharCode*, Unicode [8], int, int*, double*, double*, double*, double*)'
 
Same error for line 2297 as well.
 
=== For more information ===
There is some old information on building Inkscape with either Mingw on Windows, or a cross-compiler on Linux, at http://inkscape.modevia.com/win32_inkscape_org/win32buildnotes.html
There is some old information on building Inkscape with either Mingw on Windows, or a cross-compiler on Linux, at http://inkscape.modevia.com/win32_inkscape_org/win32buildnotes.html
and old files mey be
http://inkscape.modevia.com/win32libs/
== Creating an installer ==
There are currently two complementary methods:
* NSIS (Nullsoft Scriptable Install System), for creating an *.exe installer
* WiX Toolset (Windows Installer XML Toolset), for creating an *.msi installer
NSIS provides a higher degree of freedom giving the .exe installer some advantages, notably translations, better component selection and smaller file size.
MSI however is the format preferred by many computer experts because it's a format standardized by Microsoft (i.e. it ''should'' always work) and facilitates administrative installation tasks.


=== Create the Setup package for Win32 ===
In the long run it would be desirable to have a single solution combining the advantages of both methods and preferably allowing to create *.exe and *.msi installers at the same time. Input and contributions are welcome!


To create the setup package you need the NSIS installer on your PC. Get that from http://nsis.sf.net .
=== NSIS installer (*.exe) ===
You have successfully built Inkscape and everything is in the ...\Inkscape\Inkscape\ directory.
Open the ...\Inkscape\packaging\win32\inkscape.nsi using the NSIS program and compile the package. Sooo easy :-)


In order to create an *.exe installer you need to download and install [http://nsis.sourceforge.net/ NSIS]. Starting with Inkscape 0.92 a Unicode installer is built, so you need at least NSIS 3.0 (which is the first version with official Unicode support).


==== A Note from Jon about UNICODE on Win32 ====
# Compile Inkscape as described above.
# You should then have a distribution directory containing all necessary files in either <code>…\inkscape</code> or <code>…\build\inkscape</code> sub-folder.<br/><small>At least this is where NSIS will be looking for it. If you have set-up paths differently define <code>INKSCAPE_DIST_DIR</code> in <code>inkscape.nsi</code> accordingly.</small>
# Compile the file <code>…\packaging\win32\inkscape.nsi</code> using NSIS (e.g. by right clicking the file and choosing "Compile NSIS Script").


Actually, Microsoft themselves never use _UNICODE, nor it's 'evil' friends TCHAR and _T.
Once finished compiling (to reduce compile time you can choose a compressor different from LZMA) you should have a brand-new Inkscape *.exe installer in the <code>…\packaging\win32</code> folders.
If it is used, it results in a binary that can not be run on Windows 95/98[[/ME]]. It is more of a "Windows NT only" define.


Microsoft applications like MS Office have been pure 16-bit Unicode internally for years now. Also remember that BSTRs in Win32 are required to have 16-bit Unicode data. So for any COM access on a Win32 box running Win9x[[/ME]] 'multibyte' or '8-bit' COM calls convert all ANSI data to Unicode once you pass things in. To avoid this, Microsoft just keeps data 16-bit Unicode and then translates to local ANSI codepage only when data needs to be passed directly to a Win32 call.
=== WiX Toolset (*.msi) ===


To help developers, Microsoft finally made public their API they had been using. It's [http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx "The Microsoft Layer for Unicode"].
In order to create an *.msi installer you need to download and install the [http://wixtoolset.org/ WiX Toolset].


Although that simplifies things, it's not required. I've done Win32 programs that are 16-bit Unicode and run on Windows 95/98[[/ME]] with no problems years before they released that.
Step-by-step instructions can be found in the file [http://bazaar.launchpad.net/~inkscape.dev/inkscape/trunk/view/head:/packaging/wix/README <code>…\packaging\wix\README</code>].


Soo.... _UNICODE can't be used as it makes your binary unusable on Win9x[[/ME]]. Then it turns out that TCHAR and _T can't be used either. (Oh, and MS can't really use them, since Office does run on Win9x[[/ME]]). So just explicitly use some 16-bit datatype for chars. Microsoft is misleading in their documentation when they state that wchar_t is 16-bit. Most other platforms (including Mac OS, Linux, Solaris, BSD, etc) follow the language standard's recommendation and make it 32-bit. So it is best to avoid wchar_t for any real cross-platform code.


So, some general guidelines are:
=== Windows store (*.appx) ===
* Never define _UNICODE
* Don't use _T
* Don't use TCHAR
* Don't use wchar_t
* Use some explicit 16-bit type for characters/strings
** [http://www.icu-project.org/ International Components for Unicode (ICU)] does this


So then it's a simple matter of converting data from the standard UTF-8 GTK+ data to UTF-16 data before passing to Win32-land.  
In order to upload the installer on [https://www.microsoft.com/fr-fr/store/p/inkscape/9pd9bhglfc7h the windows store], you need to use the [https://www.microsoft.com/fr-fr/store/p/desktop-app-converter/9nblggh4skzw desktop app converter] to create a .appx from the msi installer. The correct commandline is :


The result? A single binary that executes properly on both [[Win9X/ME]] and [[WinNT/2K/XP]], including full and proper font and filename support.
C:\src\inkscape\trunk> desktopAppConverter -Installer Inkscape-0.92.1-x64.msi -Destination C:/Users/Inkscape/SomeFolder/ -PackageName 25415Inkscape.Inkscape -Publisher CN=XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX -Version 0.92.1.0 -MakeAppx -AppDisplayName Inkscape -PackagePublisherDisplayName Inkscape -PackageDisplayName Inkscape -AppID Inkscape


And, as I've mentioned before, I've actually achieved this for a few different shipping products and projects.
The correct CN name can be found on the [https://developer.microsoft.com/en-us/dashboard/apps/overview windows developer admin panel] where you upload the package.


-- [[JonCruz|Jon C]]
== Note about Unicode ==


=== SVN and Windows ===
The GTK stack depends on functions only present in NT-based Windows (2000 and later). Therefore, Inkscape code can assume that Unicode functions from the Windows API (like GetCommandLineW) are always present. Note however that you should use the GLib/GTK functions rather the Windows API whenever possible.


If you want to access Inkscapes' subversion repository on SourceForge from Windows, I'd heartily recommend [[TortoiseSVN]].
=See also=
It has the SSH stuff built into it so you don't have to mess about with putty, and
*[[Compiling Inkscape]]
it integrates right into Explorer, so SVN becomes just an extension of the right-click file commands.
*[[Using Visual Studio]]
get it from http://tortoisesvn.net/


John
[[Category:Developer Documentation]]

Latest revision as of 19:03, 25 October 2017

Note: The information on this page is outdated. Please see Compiling Inkscape on Windows for the updated instructions.

For 64 bit: see Compiling Inkscape on Windows 64-bit


Inkscape was originally written for Linux, but it has been ported to other platforms, including Windows. Since Windows is not POSIX compliant and doesn't have several features useful to developers (like package management), compiling Inkscape on Windows is more tedious than on Linux, but perfectly possible. To make it easier, we have compiled a package that contains all the libraries you need to build Inkscape. This reduces the effort of compiling Inkscape to: download and install 3 programs, download library package, download sourcecode, and you are ready to go.

Setting up the build environment

To develop Inkscape, you will need the following things:

  • Bazaar
  • PuTTY programs: puttygen.exe and pageant.exe
  • TDM's GCC (MingW): Please use exactly the version 4.6.1 32bit bundle installer and follow the instructions below. In the setup, Uncheck the [Check for updated files on the TDM-GCC server] when installing, or it will install a newer version. Newer versions (tdm-gcc-4.7+) introduce important changes in gcc and don't work with the current Inkscape devlibs (see the discussion on the developers' list).
  • Launchpad account

In order to build the installer (not needed for most developers):


Install the compiler

Run the TDM-MinGW installer:

  1. Install in a path that doesn't contain spaces. The path 'C:\mingw' is ideal beacuse it is currently set in the mingwenv.bat file (along with the location of devlibs).
    • TDM-MinGW's default install option may be to a different location. You will have to edit the mingwenv.bat file to point there.
    • If you install it into another path, set the environment variable MINGW_PATH to the TDM-MinGW installation directory, e.g. the one containing README-tdm-gcc.txt (right click My Computer -> Properties -> Advanced -> Environment Variables).
  2. Be sure to enable the "GCC -> openmp support" checkbox from the components list

Create your Launchpad account

You can skip this step (or do it later) if you just want to download the sources, but not submit your changes.

If you do not have an SSH public/private key pair to identify yourself:

  • run the program puttygen.exe to generate an SSH key
  • save both its parts.

Log into your Launchpad account, go to your profile page and add the public part of the generated key to the list of SSH keys. Run the program pageant.exe (you can add it to Autorun). A tray icon should appear. Right click it, select "Add Key" and pick the private key file you have just generated from the dialog. Note that you need to repeat this after every login whenever you want to access Launchpad.

Now set up Bazaar. First tell it who you are, then associate with your Launchpad account. You need to use the account name (e.g. johnq), not the display name.(John Q. Public).

C:\> bzr whoami "Your Name <your_real_email@example.com>"
C:\> bzr launchpad-login "your_launchpad_account"

Error messages using Bazaar

If you are seeing this error message in your Windows console:

         Connected (version 2.0, client Twisted)
             bzr: ERROR: Connection error: Unable to authenticate to SSH host as
               <email address hidden>
             supported auth types: ['publickey']

Please make sure to check Creating An SSH Key Pair and make sure you setup your key pair correctly (pageant.exe, puttygen.exe and plink.exe).

Install the developer libraries

Check out Inkscape Devlibs into C:\devlibs. If you check them out elsewhere, set the environment variable DEVLIBS_PATH to the path where they are. Devlibs are a bundle of all the libraries needed to compile Inkscape. If you experience any problems, make sure you have an up to date copy of those libraries and an up to date checkout of Inkscape source. To reduce the size of the download, pass the --lightweight parameter.

C:\> bzr checkout --lightweight lp:inkscape-devlibs devlibs

To update devlibs:

C:\devlibs> bzr update

All Inkscape developers can commit to the devlibs trunk. Advanced information about Devlibs, mainy useful when you want to update them to newly released versions of upstream libraries, is available here: Inkscape Devlibs. You can see some infomation from launchpad:inkscape-devlibs and trunk/files.

Obtaining Inkscape source code

You can obtain released Inkscape source from a tarball. Since version 0.47 they are hosted on Inkscape's Launchpad page. There are ready-made installers provided, so there's usually little reason to compile the stable version yourself.

To obtain cutting edge code, check out Inkscape source from the Bazaar repository. You can also use the TortoiseBZR shell extensions to do this. The recommended way is to first create a shared repository, then check out the Inkscape branch into that shared repository. Using this setup, branching will be a lot faster.

C:\src\inkscape> bzr init-repo --rich-root .
C:\src\inkscape> bzr upgrade
C:\src\inkscape> bzr checkout lp:inkscape trunk

If you don't want to create any branches, you can skip the shared repository step.

C:\src> bzr checkout lp:inkscape

IMPORTANT: make sure that the path to your Inkscape source checkout does not contain spaces. Unix tools do not like them and you will end up with a lot of error messages about missing files.

Building

Environment variables

Edit the file mingwenv.bat in the root directory of the Inkscape source to match you local paths. Most importantly the two lines:

# Path to the Inkscape development libraries.
if "%DEVLIBS_PATH%"=="" set DEVLIBS_PATH=c:\devlibs

# Path to the MinGW installation. Note: MinGW does not work with white spaces in the path name.
if "%MINGW_PATH%"=="" set MINGW_PATH=c:\mingw

should point to the folders containing MinGW and the inkscape-devlibs.

Whenever you want to build Inkscape open a command prompt (cmd.exe), change into the root directory of the Inkscape source and set the environment variables with the following command:

mingwenv.bat

Compiling Inkscape using CMake

Note: To significantly reduce the time needed for incremental rebuilds consider using CMake in combination with Ninja.

Go to the directory containing your Inkscape source and create the build output directory. In example:

mkdir build
cd build

You can also create an out of source build anywhere else in your file system. Just make sure that you pass the correct path to the source code directory in the next step. Create the makefiles using CMake:

# Pass the path to the source code directory as a parameter.
cmake -G "MinGW Makefiles" ..

Start the build process. The compiled Inkscape.exe will be in bin directory afterwards:

# 2 is the number of parallel threads to use for compiling. Increase the number to utilize more of your available CPU cores.
mingw32-make -j 2

Note: The version of mingw32-make included in TDM GCC 4.6.1 (this is what you should be using when building 32-bit Inkscape) does not have jobserver support, yet. As CMake makes use of recursive make calls the -j option won't have any effect on the recursively spawned instances. You can work around this by executing set MAKE=mingw32-make -j 2 before starting the compilation process (this will make each spawned instance use up to 2 jobs).

Collect all the needed files and create a selfcontaing directory in ./build/inkscape/:

mingw32-make install

As cmake hides the actual compiler calls, here is a way how to see what make is doing.

mingw32-make VERBOSE=1 -j 2
If something goes wrong

Execute the following commands from the build directory

rm -r CMakeFiles
rm CMakeCache.txt

and start with running CMake (see above) again.

If something goes very wrong

Remove the build directory and start over.

Compiling Inkscape using btool (deprecated)

Note: This method was the default up to Inkscape 0.91. It still works in 0.92 but compiling using CMake as described above is the preferred option.

Now compile the build tool with the following command:

C:\src\inkscape\trunk> g++ buildtool.cpp -o btool -fopenmp

The -fopenmp flag enables OpenMP which allows to use parallel compilation threads when building Inkscape.

Building Inkscape

Finally initiate the compilation. Get a coffee or take your dog out for a walk, because it will take a rather long time. If you have a multicore processor, add "-j 8" to use (for example) 8 parallel compilation threads.

C:\src\inkscape\trunk> btool -j 8

Once everything is done, there should be an inkscape directory that contains the Inkscape executable and libraries needed to run it.

Rebuilding

If you have only changed a few files and want to rebuild, delete the inkscape directory and run btool again.

To rebuild from scratch, execute the following sequence of commands:

C:\src\inkscape\trunk> btool clean
C:\src\inkscape\trunk> btool

Dealing With Build Errors

Feel free to add any questions or answers you have in here;

Q - My firewall software (Comodo's Defense+ component or similar) stopped the process continuing to the next step in the build, because I wasn't there to permit an action and it timed out. What can I do?

A1 - The best thing is to disable stuff like Defense+ (put it in learning mode works) because it will stop any process that is not approved, and building makes new files which can't be approved before they're built. Disabling Comodo's Defense+ does not disable your firewall, either inbound or outbound, but just the part that scans every application for suspicious operations. Other firewalls etc may vary.

A2 - If that doesn't suit, often you can simply run btool again and wait for Defense+ (or similar) to ask for approval for the process, and it will then continue as normal with the build. But remember that approving all the processes involved in the build process once doesn't mean they will all slip through next time.

A3 - This is the more complex way to continue, but may help if you have problems with A2. If you know the stage the process was meant to be up to (look at the output in the command windows and compare to the stages in the build.xml file), you can start again from there.

You may see something like this in the command window;

    =============================
    ## Target : link : link objects and library to create executable
    ---- task : rc
    ============ cmd ============
    windres -o build/inkres.o --include-dir=src src/inkscape.rc
    =============================
    ---- task : link

This will likely be followed by an error message. This means you were at the link stage

Now simply type;

    ...>btool stage

Or in this case

    ...>btool link

And the build will continue from there.

After this, you will probably have to step through the remaining stages manually, one by one. The stages can include (see build.xml, where each stage is labelled 'target name="target"') init, touchabout, compile, java, lib, i18n, link, linkinkview, dist, dist-all, clean.


Q - How do I rebuild just one file.o file? For instance if one particular file has gone wrong, or I want to try patching just one part of the code.

A - To find the right command for building any particular file in Inkscape, just look in the compile.lst after you have used btool once. Search for the name of the particular file (eg: print.cpp) and you will find the command used to compile it. You'll need to paste this into a text file, remove any carriage reurns and then paste that onto the command line.


Q - After I patched a file, I left a backup of the old file in the same directory called Copy of{filename}.cpp. The compiler complains about this file when building and stops.

A - Do not leave anything with a suffix .cpp in the source directories, apart from the original (or patched) source files. The build tool will try to compile everything ending in .cpp and will complain. If you backup an old file in the same directory before patching, call it {filename}.cpp.old or similar.


Q - I think I followed the instruction above. What could have caused the compiling error like this for src/extension/internal/pdfinput/pdf-parser.cpp?

    src/extension/internal/pdfinput/pdf-parser.cpp:2248: error: no matching function for call to 'GfxFont::getNextChar(char*&, int&, CharCode*, Unicode [8], int, int*, double*, double*, double*, double*)'

Same error for line 2297 as well.

For more information

There is some old information on building Inkscape with either Mingw on Windows, or a cross-compiler on Linux, at http://inkscape.modevia.com/win32_inkscape_org/win32buildnotes.html and old files mey be http://inkscape.modevia.com/win32libs/

Creating an installer

There are currently two complementary methods:

  • NSIS (Nullsoft Scriptable Install System), for creating an *.exe installer
  • WiX Toolset (Windows Installer XML Toolset), for creating an *.msi installer

NSIS provides a higher degree of freedom giving the .exe installer some advantages, notably translations, better component selection and smaller file size.

MSI however is the format preferred by many computer experts because it's a format standardized by Microsoft (i.e. it should always work) and facilitates administrative installation tasks.

In the long run it would be desirable to have a single solution combining the advantages of both methods and preferably allowing to create *.exe and *.msi installers at the same time. Input and contributions are welcome!

NSIS installer (*.exe)

In order to create an *.exe installer you need to download and install NSIS. Starting with Inkscape 0.92 a Unicode installer is built, so you need at least NSIS 3.0 (which is the first version with official Unicode support).

  1. Compile Inkscape as described above.
  2. You should then have a distribution directory containing all necessary files in either …\inkscape or …\build\inkscape sub-folder.
    At least this is where NSIS will be looking for it. If you have set-up paths differently define INKSCAPE_DIST_DIR in inkscape.nsi accordingly.
  3. Compile the file …\packaging\win32\inkscape.nsi using NSIS (e.g. by right clicking the file and choosing "Compile NSIS Script").

Once finished compiling (to reduce compile time you can choose a compressor different from LZMA) you should have a brand-new Inkscape *.exe installer in the …\packaging\win32 folders.

WiX Toolset (*.msi)

In order to create an *.msi installer you need to download and install the WiX Toolset.

Step-by-step instructions can be found in the file …\packaging\wix\README.


Windows store (*.appx)

In order to upload the installer on the windows store, you need to use the desktop app converter to create a .appx from the msi installer. The correct commandline is :

C:\src\inkscape\trunk> desktopAppConverter -Installer Inkscape-0.92.1-x64.msi -Destination C:/Users/Inkscape/SomeFolder/ -PackageName 25415Inkscape.Inkscape -Publisher CN=XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX -Version 0.92.1.0 -MakeAppx -AppDisplayName Inkscape -PackagePublisherDisplayName Inkscape -PackageDisplayName Inkscape -AppID Inkscape

The correct CN name can be found on the windows developer admin panel where you upload the package.

Note about Unicode

The GTK stack depends on functions only present in NT-based Windows (2000 and later). Therefore, Inkscape code can assume that Unicode functions from the Windows API (like GetCommandLineW) are always present. Note however that you should use the GLib/GTK functions rather the Windows API whenever possible.

See also