From Inkscape Wiki
Jump to navigation Jump to search

For the impatient

1. Install XCode tools from your OS X installation DVD

2. Download and install MacPorts

3. In Terminal (Applications>Utilities>Terminal) type

sudo port sync
sudo port selfupdate
sudo port install cairo +pdf boehmgc gtkmm intltool libxslt lcms popt poppler boost gnome-vfs \
 libgnomeprintui automake autoconf subversion

Grab a cup of coffee

4. In Terminal, get and build Inkscape

svn co inkscape
cd inkscape/packaging/macosx/
./ a c b i -s p

Et voilà. If you want to understand what you just did, read on.


To compile Inkscape from source you need:

  • Mac OS X > 10.3
  • XCode Tools. They are on your installation DVD, in the optional installs, or can be download from Apple Developer Connection. You can customize the install to make it smaller (avoir documentation and example software for example). You need at least: gcc, XCode, X11SDK.
  • Inkscape's source code. You can download an official release source code, a development snapshot or checkout a copy of the current state of the SVN repository using subversion. Subversion comes pre-installed on Leopard. On previous system, subversion can be installed by package management systems (see point below) or with an OS X installer package
  • A means of getting Inkscape's numerous dependencies: glibmm, gtkmm, lmcs, boehmgc... We recommend the use of MacPorts right now. (Fink was used in the past but it no longer meets Inkscape's needs currently.)

Compiling Inkscape with X11, using MacPorts [Recommended method]

Installing dependencies

You can use MacPorts to list Inkscape dependencies:

port deps inkscape

Some are mandatory and you can install them with the command:

sudo port install boehmgc gtkmm intltool libxslt lcms popt boost

Others provide additional functionality to Inkscape:

  • gnome-vfs : access to remote servers, in particular import from Open Clipart Library
  • aspell : check spelling of text elements [Note: I have never seen it working on OS X]
  • libgnomeprintui
  • loudmouth : jabber library used by InkBoard
  • cairo +pdf (cairo with the pdf variant) : better pdf export
  • poppler : better pdf import
sudo port install gnome-vfs aspell libgnomeprintui loudmouth cairo +pdf poppler

NB: Cairo was already installed at previous step as a GTK dependency. You need to either deactivate the old version and install this one, or directly write it on the command line above.

In addition, Inkscape requires versions of the autotools more recent thant those that ship with OS X. Install them:

sudo port install autoconf automake

Setting the build environment

MacPorts's hierarchy (/opt/local/) is not searched for libraries by default. Therefore, before the configuration starts, some environment variables need to be set. The environment variables are presented in bash syntax here.

export LIBPREFIX="/opt/local"
#  automake seach path
export CPATH="$LIBPREFIX/include"
#  configure search path
export CPPFLAGS="-I$LIBPREFIX/include"
#  compiler arguments
export CFLAGS="-O3 -Wall"

You can also use ccache (sudo port install ccache) to speed up the compilation a bit. To do so, add compiler variables:

export CC="ccache gcc"
export CXX="ccache g++"


If you compile Inkscape for the first time from an svn checkout you need to generate the configure script. Navigate to Inkscape's source directory and run:


Then run configure with the options --disable-static --enable-shared and --prefix which sets the directory where the build products are placed. It must be somewhere you have write access to.

./configure --disable-static --enable-shared --prefix=/path/to/build/products/

I you want to package Inkscape into a double-clickable .app bundle in order to access it like a regular OS X application (you probably want to), you need to add the option --enable-osxapp:

./configure {...} --enable-osxapp

If you have loudmouth installed and you want to enable whiteboard functionality in Inkscape, add --enable-inkboard.

Other configuration options can be set, check the list of options by issuing:

./configure --help

Building and Installing

Just run:

make install

Creating an .app bundle

Assuming that you have used the --enable-osxapp option during configure, navigate to Mac OS X packaging directory in Inkscape source code and use the automated script:

cd packaging/macosx
./ -s -b /path/to/install/prefix/bin/inkscape -p ../../Info.plist

The script copies Inkscape binary and all its dependencies into the app bundle. The -s options strips libraries from debugging information (the bundle is therefore smaller). Omit this option if you want to keep debugging info.

Creating a disk image to distribute Inkscape created at the previous step is completely independent from the original location of MacPorts libraries and can therefore be distributed. It will only work on your platform though (PPC or Intel) and incompatibilities are known between X11 versions on different major versions of OS X (Panther, Tiger and Leopard). The general rule is that versions are not backward compatible.

The most widespread way of distributing applications on Mac OS X is via .dmg images. You can created a dmg image of Inkscape, with a nice background and all, using the script:

./ -p

in the packaging directory for Mac OS X (where your app bundle should be, otherwise modify the path to

Automated build script

All these steps are automated by a build script: It has built-in help so to known how to use it just type:

./ help

Compiling a Universal Binary of Inkscape with X11, using MacPorts

These instructions should work on both 10.4 and 10.5 machines with the latest Xcode version installed.

Update Macport sources

The port descriptions in Macports do not currently all compile properly with their Universal variants. For this reason, we currently use a modified set of some of the portfiles that will compile a universal libraries. Work is being done to integrate these changes into Macports itself.

You can use our modified portfiles by adding our ports to your sources:

1. Checkout our ports directory:

svn co ports

2. Edit your cources list to include this directory:

sudo vim /opt/local/etc/macports/sources.conf

And add the following line *before* the existing rsync source:


3. Run port sync

sudo port sync

Build Universal dependencies

You should now be able to compile Inkscape's essential dependencies as Universal libraries on either 10.4 or 10.5, by giving the "+universal" option for each, e.g.

sudo port -v install poppler +universal gtk2 +universal ...

If you already have non-universal versions of these ports installed you may need to deactivate the port and rebuild it, e.g.

sudo port -f uninstall cairo
sudo port clean cairo
sudo port -v install cairo +universal

Compiling Inkscape with native GTK using MacPorts [experimental]

This process is very similar to compiling an X11 version of Inkscape except for the building of dependencies: need to build native versions of Inkscape dependencies. At the moment (2007-12-17) this process does not produce a usable version of Inkscape but the more people try to use it, the quicker the bugs will be ironed out!

Native version of Inkscape dependencies

Thanks to the power of port "variants" and port "deactivation" you can install native versions of gtk, cairo, pango and such, alongside the regular X11 ones. To know which ports have a quartz or no_x11 variant, use the command:

port list variant:quartz variant:no_x11

This will give you an idea of what need to be replaced.

Assuming your MacPorts tree has been already used to build regular versions of Inkscape, you first need to deactivate (suppress from the tree without really uninstalling) the X11 versions of gtk, cairo, cairomm and pango:

sudo port deactivate gtk2 cairo cairomm pango

Then install native variants:

sudo port install cairo +quartz+pdf+no_x11 cairomm +quartz pango +no_x11 poppler +quartz gtk2 +quartz

Rather than deactivating and reactivating ports, you can also keep two MacPorts trees side by side, provided you install the second one from source. Let say I want to install a new tree for native versions in /opt/local/native, I would do

export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin
cd ~/MacPorts-1.x.x/
./configure --prefix=/opt/local-native --with-tclpackage=/Library/Tcl/macports-native
sudo make install

Then you need to have only one version of the port command in the path at any time so you need to setup your .bashrc (or .bash_profile or .profile) accordingly. I use shell aliases to quickly and temporarily switch to the universal version:

alias portpathregular="export PATH=/opt/local/bin:/opt/local/sbin:/Developer/Tools:/usr/local/bin: \
alias portpathuniv="export PATH=/opt/local-univ/bin:/opt/local-univ/sbin:/Developer/Tools:/usr/local/bin:  \

NB: the \ are just to mark line continuation here, suppress them and put everything in one line.

Install the rest

Eventually, follow the regular install procedure for the rest:

sudo port install libxslt boost boehmgc gtkmm lcms intltool popt

If your MacPorts tree was already ready to compile Inkscape, you should not need to reinstall anything, with the possible exception of gtkmm, which may need to be rebuilt against the native version of gtk rather than against the X11 one (please someone confirm this).

Get inkscape source code and go in the mac OS X specific packaging directory

cd packaging/macosx

There edit to remove the configure option --enable-osxapp because it puts inkscape in a .app bundle where it is started together with X11, which would defeat the purpose of this native compilation. You can also specify an alternative install prefix if you want. Then

./ u a c b i

and a native version of Inkscape is installed in the prefix you specified or in the Build/bin directory of Inkscape's source code. You can test it by

 cd ../../Build/bin/

NB: if you compiled a GTK theme engine against your old GTK install (i.e. the one with X11) and try to use it with the new install, it will complain, so edit ~/.gtkrc-2.0 to remove the offending theme or recompile it with the new native GTK.

Compiling Inkscape with native GTK using the all in one build script [experimental]

To build a native-GTK build of Inkscape, GTK and some of its dependencies must be built with special options. You can do this using the script from the Inkscape repository (it's in packaging/macosx/native-gtk/). This is a modified version of the Imendio native build script, found with instructions on this page:

This process is relatively untested. If you have any troubles using this process then please report them to Michael Wybrow (mjwybrow on sourceforge).

The process is:

export PREFIX=/your/install/prefix
./build-gtk bootstrap
./build-gtk build inkscape

Enabling python effects

moved to GettingEffectsWorking. They should work out of the box in the new versions anyway.


User Examples

  • Adam Strzeleki has outlined some improvements to this process on the Inkscape email list. See his screenshot from January 10, 2008 here.
  • JiHO has a video of his builds here and here.

Apple Documentation

  • Introduction to Runtime Configuration Covers the Info.plist files, Preferences, Environment variables and has a list of the most important Properties that the Property List should contain.


  • Sveinbjorn Thordarson's Website The author of Platypus, the Script Exec wrapper that launches the Inkscape binary.
  • Creating OS X application bundles step by step Covers the bundle concepts, copying libraries into the bundle, editing libraries with the install_name_tool, the Info.plist file and adding an icon.
  • Bringing your Java Application to Mac OS X I would regard this a little dated, and the detail is (unsurprisingly) Java-related, but it is a gentle introduction to the role of the .app bundle and give a most clear account of how to create one.
  • The Gimp .app Howto This is a very bare document, and would be of little help to you if you were new to making packages. Note that it seems to refer to a more mature Clipboard technique and Online help than we currently have; and we ought to move to parity in these areas.