Difference between revisions of "CompilingUbuntu"

From Inkscape Wiki
Jump to navigation Jump to search
Line 2: Line 2:
(Done on a system that already had build-essential installed, may or may not matter. Used Inkscape version inkscape-0.43+0.44pre4)
(Done on a system that already had build-essential installed, may or may not matter. Used Inkscape version inkscape-0.43+0.44pre4)


<nowiki>
<pre>
sudo apt-get build-deb inkscape # gets all deps for version in Ubuntu -- covers most our bases
sudo apt-get build-dep inkscape
sudo apt-get install liblcms-dev libboost-graph-dev # For little CMS and network connector layout functionality
sudo apt-get install liblcms-dev libboost-graph-dev
./configure
./configure
make
make
sudo make install
sudo make install
</nowiki>
</pre>
 
'''Notes:'''
build-dep gets all the dependencies for the version of Inkscape that comes with Ubuntu. We're not building the same version, but most of the dependencies are the same.
 
libcms-dev was required for ./configure to work, and libboost-graph-dev was needed for "network connector layout functionality"
 
 





Revision as of 00:08, 23 June 2006

Building under Ubuntu Dapper is easier than ever: (Done on a system that already had build-essential installed, may or may not matter. Used Inkscape version inkscape-0.43+0.44pre4)

sudo apt-get build-dep inkscape
sudo apt-get install liblcms-dev libboost-graph-dev
./configure
make
sudo make install

Notes: build-dep gets all the dependencies for the version of Inkscape that comes with Ubuntu. We're not building the same version, but most of the dependencies are the same.

libcms-dev was required for ./configure to work, and libboost-graph-dev was needed for "network connector layout functionality"



The following packages are need to compile cvs inkscape under a default Ubuntu Hoary/Breezy/Dapper system:

  apt-get install cvs build-essential intltool libtool libgtkmm-2.4-dev libglib2.0-dev libpng12-dev libxslt1-dev libsigc++-2.0-dev libpopt-dev libgc-dev

Inkscape requires libgc-6.4.

Breezy/Dapper doesn't require any further work.

Hoary uses version 6.3, which is provided in the Repos. (Is there somewhere to get a .deb for 6.4?)

To overwrite libgc-6.3 with libgc-6.4:

  Download gc6.4
  ./configure --prefix=/usr
  make
  sudo make install

libgc 6.5 debs for ubuntu

http://inkscape.modevia.com/ap/libgc-dev_6.5-1_i386.deb

http://inkscape.modevia.com/ap/libgc1_6.5-1_i386.deb