Difference between revisions of "Release notes/0.44/fr"

From Inkscape Wiki
Jump to navigation Jump to search
Line 590: Line 590:
=== Les espaces de nom (namespaces) peuvent nécessiter d'être réparés ===
=== Les espaces de nom (namespaces) peuvent nécessiter d'être réparés ===


* Les précédentes versions d'Inkscape sauvaient parfois les documents avec de <b>mauvaises URIs d'espaces de noms</b> sans prévenir. Ce problème a été résolu, mais des fichiers ainsi corrompus ne peuvent plus être ouverts. Ces documents peuvent nécessiter une correction manuelle des déclarations d'espaces de noms. Les URLs correctes sont listées ci-dessous, avec les préfixes d'espaces de noms corrects entre parenthèses :
* Les précédentes versions d'Inkscape sauvaient parfois les documents avec de <b>mauvaises URIs d'espaces de nom</b> sans prévenir. Ce problème a été résolu, mais des fichiers ainsi corrompus ne peuvent plus être ouverts. Ces documents peuvent nécessiter une correction manuelle des déclarations d'espaces de nom. Les URLs correctes sont listées ci-dessous, avec les préfixes d'espaces de noms corrects entre parenthèses :
** '''Sodipodi''' (''sodipodi''): http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd
** '''Sodipodi''' (''sodipodi''): http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd
** '''Inkscape''' (''inkscape''): http://www.inkscape.org/namespaces/inkscape
** '''Inkscape''' (''inkscape''): http://www.inkscape.org/namespaces/inkscape

Revision as of 20:39, 20 June 2006

Inkscape 0.44: en bref

Inkscape 0.44 apporte plus de fonctionnalités que jamais et améliore celles déjà existantes. Quelques points majeurs :

  • Boîte de dialogue Calques
  • Mode d'affichage Contour (fil de fer), permettant d'améliorer les performances.
  • Export PDF (avec transparence) natif.
  • Support des masques et des chemins de découpe.
  • Raccouris clavier configurables. Une compatibilité optionnelle avec ceux de Xara X est incluse.
  • Une palette de couleurs insérable dans la fenêtre d'édition.
  • Un indicateur interactif de style de la sélection présent dans la barre d'état.
  • la possibilité innovante de "sculpter les noeuds" ainsi que que d'autres améliorations de l'outil noeud.
  • Les extensions sont activées par défaut et fonctionnent sur la plupart des plateformes.
  • Un meilleur support du SVG : élément <switch>, profils de couleur ICC pour les images.
  • Des centres de rotation persistants, la commande Coller les dimensions.
  • De nouvelles icônes, de nombreuses améliorations cosmétiques; les boîtes de dialogue des préférences ont été améliorées et les menus réorganisés.
  • Des centaines de corrections de bogues et de fonctionnalités plus petites.
  • Une nouvelle importante même si elle n'est pas directement liée à Inkscape : depuis notre dernière version, Firefox 1.5 a été lancé avec le suppport du SVG activé par défaut. Ceci signifie que vous pouvez directement afficher vos documents Inkscape dans une fenêtre Firefox sans avoir à effectuer une conversion de format ou installation de greffon !

Performance

Mode contour

Un mode d'affichage contour (ou fil de fer) est désormais disponible. Utilisez le menu Affichage > Mode d'affichage > Contour pour l'activer. Dans ce mode :

  • tous les chemins ou formes sont rendus par leurs frontières inversées (noir sur fond clair et vice versa) avec un contour de largeur fixe (1 pixel à l'écran, quel que soit le zoom), et sans remplissage.
  • Le texte est peint avec un remplissage inversé, sans contour;
  • Les bitmaps sont affichés tels quels.
  • toute transparence ou tout dégradé est ignoré.

Dans la plupart des cas, le mode contour n'est pas beaucoup plus rapide que le mode normal (10 à 50% plus rapide en général), et dans certains cas particuliers il peut même être plus lent. Cependant, son intérêt ne réside pas uniquement dans sa rapidité; c'est un moyen pratique pour se faire une idée de la structure des objets de votre document, éditer les noeuds avec précision et pour trouver des "objets errants".

Vitesse

En plus du mode Contour qui facilite le travail avec des dessins complexes, cette version d'Inkscape apporte des améliorations de la vitesse sur plusieurs domaines.

  • Grace à des optimisations du moteur de rendu, le rafraichissement du dessin à l'écran est 10% plus rapide, et même trois fois plus rapide dans certains cas (comme pour les chemins pointillés complexes sous un zoom important).
  • Des optimisations de l'outil Noeud apportent un gain de vitesse notable pour l'édition de noeuds. Ainsi, passer de (ou à) l'outil Noeud vers un autre outil (avec un chemin sélectionné), ainsi que sélectionner des noeuds avec cet outil, est désormais au moins dix fois plus rapide qu'auparavant. Les autres opérations, comme le déplacement de courbes ou de noeuds et les déplacement/redimensionnement/rotation sur plusieurs noeuds sélectionnés sont également plus rapides. Ceci est particulièrement important dans le cadre d'un travail sur des chemins complexes; grâce à ces optimisations, les chemins contenant plusieurs milliers de noeuds, même s'ils restent lents, sont bien plus utilisables.
  • Une optimisation de la méthode de définition d'attribut permet de rendre certaines opérations bien plus rapides : déplacer plusieurs objets à l'aide des raccourcis flèches va au moins 30% plus vite que dans la version 0.43. Ceci est particulièrement perceptible quand vous déplacez des clones sélectionnés avec leur original (par exemple, dans le cas d'un pavage de clones), et dans ce cas, Inkscape va trois à quatre fois plus vite.
  • Les icônes de l'interface sont maintenant rendues en tâche de fond (à partir du fichier share/icons/icons.svg) quand Inkscape est inactif, plutôt qu'en attendant que toutes les icônes d'un menu ne soient rendues que lorsque vous vous y accédez pour le première fois. Ceci permet d'éliminer la latence énervante lors du premier accès à un menu.
  • Avant, lors d'un zoom sur une petite portion d'un chemin (spécialement dans le cas d'un chemin grand et complexe), un ralentissement d'Inkscape était perceptible et l'utilisation mémoire augmentait énormément. Nous avons optimisé le moteur de rendu afin de ne traiter que la partie visible d'un chemin, et en conséquence la vitesse de rendu est maintenant à peu près constante quel que soit le niveau de zoom, et environ 10 à 40 fois plus rapide que dans la précédente version (le gain étant plus important pour des zooms plus serrés).
  • La commande Chemin > Séparer est jusqu'à cent fois plus rapide pour les chemins complexes comportant des milliers de sous-chemins.

Conformité à la norme SVG

Support des profils de couleur

Inkscape comporte maintenant une fonctionnalité basique de gestion de profil ICC. Si compilé avec le support de LittleCMS (si vous exécutez configure en activant --enable-lcms), Inkscape réussit le test de profil couleur ICC du W3C. L'élément <color-profile> a été mis en place pour l'attribut "color-profile" des éléments <image>.

Support de l'élément <switch>

Le module de traitement conditionnel (Conditional Processing Module) de la norme SVG 1.1 est maintenant supporté, incluant l'élément switch et les attributs requiredFeatures, requiredExtensions, systemLanguage. Inkscape passe avec succès les tests de traitement conditionnel ([1] et [2]) du W3C.

Résultat SVG

  • Dans les documents SVG d'Inkscape, les couleurs sont maintenant désignées par un nom (‘white’) ou un code héxadécimal à trois chiffres (‘#f3c’) quand cela est possible.
  • Les valeurs numériques dans les attributs transform sont écrites sans zéros de remplissage non significatifs, et toute valeur inférieure à 1e-8 en valeur absolue (généralement due à une erreur d'arrondi) est écrite comme 0 afin de diminuer l'encombrement.

Interface

Boîte de dialogue Calques

Une boîte de dialogue Calques (Ctrl+Maj+L) a été introduite dans cette version. Elle est synchronisée avec le sélecteur rapide de calque situé dans la barre d'état, ce qui vous permet d'utiliser l'un ou l'autre selon votre convenance..

  • Dans la boîte de dialogue, vous pouvez cliquer sur un calque pour le en faire le calque courant, mais aussi le rendre visible/invisible et verrouillé/déverrouillé. Vous pouvez changer la visibilité ou le verrouillage d'un calque sans avoir à le rendre courant.
  • Une arborescence hiérarchique des calques est représentée par un affichage en forme d'arbre dans la boîte de dialogue. Vous pouvez étendre ou réduire les branches de l'arbre afin de faciliter la navigation dans la structure des calques d'un document.
  • En bas de la boîte de dialogue, des boutons permettent d'ajouter un nouveau calque, de monter ou descendre le calque courant (simplement d'un cran ou bien au premier/dernier plan) et de supprimer le calque courant.
  • En dessous de ces boutons, une glissière et un champ numérique permettent de modifier l'opacité du calque courant. L'opacité d'un calque affecte tous les objets de ce calque, de la même façon que l'opacité d'un groupe.

Indicateur de style des objets sélectionnés

A new control in the left end of the statusbar lets you quickly view and change the fill and stroke of the selected objects. When you have a text selection in Text tool or a gradient handle selected in the Gradient tool, this indicator displays and changes the style of the text fragment or gradient stop, instead of the entire object (it's the same behavior as the Fill&Stroke dialog.)

  • The two indicators, labelled F: (top) and S: (bottom), display fill and stroke of the selected object(s) correspondingly. (For gradient handles, they always display the same style.)
  • Each fill/stroke indicator can display either a color+opacity swatch (the opacity shown here is the fill opacity or stroke opacity, not the master opacity) or a text label specifying N/A (nothing selected), None (no fill/stroke), Unset (unset fill/stroke), L Gradient, R Gradient, Pattern (corresponding fill/stroke types), or Different (selected objects have different fill/stroke types).
  • Additionally, each indicator may be accompanied by one of two flags, m ("multiple", meaning there are two or more objects all with the same fill/stroke) or a ("averaged", meaning there are two or more objects with different flat colors in fill/stroke, and the indicator shows the average of these colors).
  • Left-click on an indicator opens or activates the Fill&Stroke dialog with the corresponding tab (Fill or Stroke) active.
  • Right-click on an indicator opens a popup menu with the following items:
    • Edit fill/stroke...: Opens or activates the Fill&Stroke dialog with the corresponding tab selected. (Same as left-click.)
    • Last set color: Applies to the selected objects the fill/stroke color that was last applied to anything.
    • Last selected color: Applies to the selected objects the fill/stroke color that was last displayed in this indicator. (Allows you to easily copy fill/stroke color between objects: select source, select destination, apply "last selected color".)
    • Invert: Sets the fill or stroke to the inverse of the current color (does not affect opacity).
    • White, Black: Sets the fill or stroke to the corresponding color (fully opaque).
    • Copy color, Paste color: Copies or pastes the fill or stroke color (when it's color) to/from the system clipboard, as text in the #rrggbb hex format.
    • Swap fill and stroke: Exchanges fill and stroke (both their types and colors, if any).
    • Make fill/stroke opaque: Removes fill or stroke transparency (not master transparency!).
    • Unset fill/stroke: Unsets fill or stroke from selected objects.
    • Remove fill/stroke: Removes fill or stroke from the selected objects.
  • Middle-click on a fill/stroke indicator removes fill/stroke from selected objects; if it is already removed (i.e. if the indicator displays "None"), it does the same as the "Last set color" command from the popup menu.
  • Drag and Drop of colors onto a fill/stroke indicator sets the fill and stroke of the selected object(s) correspondingly.
  • The Stroke indicator also displays the stroke width of selection (averaged if there are multiple objects selected with different stroke widths), located to the right of the stroke color/transparency swatch. Left-clicking on it opens the Fill&Stroke dialog with the Stroke Style tab selected. Right-clicking on it opens a popup menu which allows you to choose the units for displaying the stroke width, as well as choose one of the presets to assign to selection.
  • To the right of the fill/stroke indicators, the Opacity numeric field (labelled "O:") shows and allows you to change the master opacity of the selected object (or the averaged opacity of several selected objects). Right-clicking the numeric field opens a popup menu with preset opacity levels. Middle-clicking on the "O:" label cycles the opacity through the values of 0 (transparent), 0.5, and 1 (opaque).

The zoom field and the cursor coordinates indicator have been rearranged for compactness and moved to the right end of the statusbar. There's also a window resize handle added at the very end of the statusbar.

Indicateur de style des outils

For each object-creating tool (shapes, Pen/Pencil, Calligraphic, Text), the Controls bar (above the canvas) now includes a style indicator on the right. This indicator shows you which style the newly created object will have.

  • The indicator correctly displays whichever style the tool is set to use - the global "last set" style or that tool's fixed style. For example, clicking on a palette swatch (even with nothing selected) changes the "last set" color and, if your tool is set to use the last set color, its indicator is updated, giving you an idea of your "brush" before you start to draw.

Barre des contrôles de l'outil texte

  • This version adds the beginnings of a Controls Bar for the Text tool (previously empty). Now you can select the font family, size, apply bold and italic styles, change alignment and text orientation without opening the Text and Font dialog.
  • All controls are instant-apply and work on the entire text object (if nothing selected) or text selection. They can also apply to multiple text objects (though you would need to switch to Selector to select multiple text objects, then switch back to Text tool for its controls).
  • The font-family drop-down contains names and previews of all fonts; unlike other programs, we didn't apply each font to its name, but added a separate preview string displayed with gray color after each font's name. This design ensures readability of font family names and provides maximum useful information in a limited space.
  • We will be adding more controls (including spacing and kerning) to this bar for the next versions.

Palette de couleurs insérable

  • Previously, color swatches could only be used from a floating palette (Ctrl+Shift+W). Now the color swatches palette is embedded in the main UI, at the bottom of the window between the canvas and the statusbar. It is enabled by default; use View > Show/Hide > Palette to enable or disable it. The docked palette has the same functionality as the floating one; use a button in the top right corner to access the swatches menu.
  • The Wrap option (off by default) in the swatches menu converts the palette from a single row into a frame 2 or 3 rows high, for better access to colors in large palettes.
  • Drag and Drop of colors has been enabled.
    • Dragging colors from a palette shows a live swatch of the color being dragged under cursor.
    • Drag and Drop of colors onto the selected style indicator in the statusbar sets the fill or stroke of the selected object(s).
    • Colors can be dropped directly on to objects on canvas to set their fill, or shift+dropped to set their stroke. This affects only the object you drop the color on, regardless of whether that object is selected or not.
    • Colors can be dragged to and from other applications.
  • The new Inkscape default color palette was added. It contains a range of grays, standard HTML named colors, and a full range of colors sorted by their HSL values (475 colors overall). It is generated by a Python script which is available from Inkscape SVN in share/palettes.
  • Several specialized color palettes, useful in color-coordinated projects, were created or borrowed from GIMP: Grays, Reds, Greens, Blues, Gold, Royal, Khaki, Hilite, and Topographic.
  • All standard sizes of the swatches (Tiny, Small, Medium, Large, Huge) are made smaller overall.

Boîte de dialogue préférences d'Inkscape

Not only was the Inkscape Preferences dialog completely rewritten and redesigned, with numerous bugs fixed in the rewrite.

  • The old tabbed dialog is gone; the new dialog fits much betters with the GNOME Human Interface Guidelines.
  • As a new feature, the Simplify threshold can now be set with more precision.

Boîtes de dialogue propriétés / métadonnées du document

  • The Document Preferences dialog is now named Document Properties, and it was split in two: metadata were extracted into the Document Metadata dialog; metadata widgets are now also spread over two pages.
  • A button was added to fit the canvas to the current selection or, if there's no selection, to the entire drawing. The button resizes the canvas and, if necessary, moves the drawing into place. It is now very easy to size the canvas to an illustration after it is ready.
  • New controls: the new object snapping features required their own property widgets, and you can set the snapping sensitivity with a slider, or let it snap regardless of distance (grid only).
  • Rearrangements within Document Properties: everything snapping-related was collected on one page; Grid and Guide widgets are on their own, the same page. For better HIG compliance, all widgets were categorized; especially the widgets on the Page page were completely rearranged in the General/Format/Border categories.
  • Bug fixes: grayed out license URI had too low contrast, so it's no longer grayed out; the proprietary license didn't clean the license URI; spinbuttons had no tooltips, and minor grid quirks were removed; data was not updated when a new file replaced another in the same window.
  • HIG compliance: much work went into that, and now only a few details are missing from full Gnome-HIG compliance.
  • Updated Creative Commons Licenses: Updated CC licenses to the latest 2.5 versions by default in the license tab of the metadata dialog.

Raccourcis clavier configurables

Inkscape's keyboard shortcuts are now configurable!

There is no graphical users interface at this time, and not all Inkscape actions can have their shortcuts customized. However, if you do not mind editing a configuration file, the majority of actions, including everything you see in the menus, can already have their keys changed. We're working on making more actions configurable.

On startup, Inkscape reads its keyboard shortcuts from share/keys/default.xml. That file is a copy of inkscape.xml in the same directory, which also contains keyboard emulation profiles for other vector editors:

  • xara.xml: Xara X/Xara Xtreme/Xara LX keys

You can copy any of these over default.xml to use that profile. In all profiles, those keys which are not used by the corresponding program still have their Inkscape bindings. If you can contribute a profile for some vector editor that we don't yet have, we will appreciate that. The files have a simple XML-based format described in inkscape.xml.

You can also customize some of your keybindings without overwriting the main default.xml. If your profile directory (~/.inkscape on Linux) contains a keys subdirectory with a default.xml file, the keybindings from that file will overlay (i.e. add to, and override in case of a conflict) the default bindings. The format of your own default.xml is the same as that of the main default.xml.

Menus

  • Zoom commands in the View menu are moved to a submenu; the Zoom In and Zoom Out commands are added to that submenu.
  • Clone commands are moved into a submenu in Edit menu and given more descriptive names and tips.
  • Pattern commands (Objects to Pattern and Pattern to Objects) are moved into a submenu in Object menu, under the new Clip and Mask submenus.
  • The contents of the Effects menu are categorized into submenus, and several effects are renamed to use more intuitive names.

Barre d'état

  • In Selector, for multiple selected objects, the statusbar now reports their types. For example, if 5 groups are selected, it displays
5 objects of type Group in layer LayerName.
instead of just "5 objects selected" as before. If there are up to 3 types in the selection, they will be listed, for example:
5 objects of types Group, Path, Rectangle in layer LayerName.
The order of the list will correspond to the order in which the objects were added to selection. If there are 4 or more types in selection, only the number of types is reported, for example:
5 objects of 4 types in layer LayerName.
  • In Selector, objects selected in groups are now identified as such, and the group ID is given, for example:
Rectangle in group g212 (layer content)
If selected objects have different parents within one layer (for example, if one is selected in a group and another outside it), the number of parents is reported:
2 objects of types Rectangle, Path in 2 parents (layer content)
If objects are in different layers, only the number of layers is reported since this also implies different parents:
2 objects of types Rectangle, Path in 2 layers
  • In Node tool, if your node selection includes nodes from different subpaths, statusbar reports the number of subpaths with selection and the total number of subpaths, for example:
2 of 195 nodes selected in 2 of 36 subpaths.
  • The contents of the statusbar message are now duplicated as a tooltip that is shown when you hover the mouse over the statusbar.
  • The statusbar text is now no longer just cut off if there is insufficient room, but an ellipsis (...) is inserted at the end to show there's more (only with Gtk 2.6 and newer).

Thème

  • Inkscape possède un nouvel ensemble d'icônes par défaut appelé "Crispy" fourni par Andre Sousa. Les nouvelles icônes ont pour but de fournir un aspect plus professionnel et cohérent à notre aplication, et aussi de rendre plus évidentes les fonctions associées à ces icônes.

Outils

Outil noeud

Sculpter les noeuds

An entirely new way of manipulating paths in Node tool is added in this version: Node sculpting. Normally, when you have several nodes selected and you drag one of them, all selected nodes move by the same amount. Now, if you Alt-drag one of the selected nodes, only that node is fully displaced; other selected nodes are moved less than the full amount, so that those farthest from the drag point remain stationary. This is similar to "proportional editing" or "soft selection" in 3D editors such as Blender.

So, for example, if you select several nodes on a straight line and Alt+drag the middle selected node, the path will bend into a smooth bell-like curve. Nodes' handles are also adjusted correspondingly to keep the overall shape smooth and natural. (If you don't have enough nodes on a path fragment that you want to reshape in this way, just select the end nodes of that fragment and press Ins a few times to populate it with nodes.)

Moreover, node sculpting is sensitive to pressure of your tablet pen. If you press slightly, your curve will have a narrow sharp tip (i.e. the nearest neighbors of your dragged node will move only a bit); if you press hard, the curve's tip will be wide and blunt (i.e. the nearest neighbors will move almost as much as the dragged node). (Hint: to stop dragging without losing your shape, first release Alt and then lift the tip of the pen.)

There are many possible applications of the sculpting technique. To take a simple example, selecting all nodes of an ellipse-like shape and Alt+dragging one of them will smoothly and naturally stretch and skew the entire shape in any direction. Doing the same to a complex path, such as star or spiral, will twist and punch it without destroying its intricate structure - this is the way to get squashed or self-intersecting stars, eccentric spirals and other shapes not easily doable before. Selecting only part of all nodes allows you to smoothly reshape parts of the figure without disturbing the rest.

When applied to text converted to path, node sculpting is a fun and easy way to twist, bend and distort it, achieving effects similar to "perspective envelope" or "curvilinear envelope" in other programs - but in a more powerful and flexible way. For example, by selecting all or part of the text's nodes and Alt-dragging, you can not only make a wavy banner out of a paragraph of text, but also apply a "magnifying lens"-like effect to any word in the middle.

Especially useful node sculpting is for complex natural paths, such as calligraphic strokes or bitmap traces, where you often want to do large-scale pushes and bends without destroying the small-scale features. Things like making a calligraphic stroke narrower in one place and wider in another, or changing the proportions, extending the ear or flattening the nose of a head - all this is now much faster and more natural to do using sculpting. It is also a new way to create new paths, too - starting from en ellipse with added nodes, it takes just a few Alt+drags to tweak it into a silhouette of a head, or a map of Australia, or an Inkscape logo!

Some examples are shown on the screenshot: [www.inkscape.org/screenshots/gallery/inkscape-0.44-nodesculpting.png].

Afficher ou non les poignées

The Controls bar for the Nodes tool now includes a toggle button which controls whether Bezier handles are shown on selected nodes (on by default). Selecting and dragging nodes on node-dense paths in zoom-out (e.g. for node sculpting) may be extremely difficult without hiding the handles, as it's hard to pick a node and not a handle when handles are shown.

Nouveau comportement de suppression

  • In Node tool, deleting node(s) by Del/Backspace keys or by Ctrl+Alt+clicking a node now tries to preserve, as much as possible, the current shape of the path. This means that the nodes adjacent to those being deleted have their handles adjusted to approximate the form that the path had before deletion. For example, if you Ctrl+Alt+click a path twice, once to add a new node and then to delete it, the path will not change at all (or change very slightly). The old deletion behavior without adjusting handles is still available via Ctrl+Del or Ctrl+Backspace.

Préserver les positions des noeuds et poignées

  • When you switch the type of the selected node to Smooth or Symmetric by pressing Shift+S/Shift+Y, you can now preserve the position of one of the two handles by hovering your mouse over it, so that only the other handle is rotated/scaled to match.
  • Similarly, when you join endnodes by pressing Shift+J, you can preserve the position of one of the two nodes by hovering your mouse over it, so that only the other node is moved.

Divers

  • The ! key inverts node selection in the current subpath(s) (i.e. subpaths with at least one selected node); Alt+! inverts in the entire path. (This is similar to how these keys work in Selector, with current subpath(s) instead of the current layer.)
  • The keyboard shortcut for "Make selected segments curves" in Node tool is changed from Shift+K to Shift+U for better mnemonics.

Plume calligraphique

Tremblement

  • Even when using a graphics tablet with pressure sensitivity, the Calligraphy pen's strokes often look too smooth and artificial. To enable a more natural look, the new Tremor parameter is added to the Calligraphy tool in this version. Adjustable in the Controls bar from 0.0 to 1.0, it will affect your strokes producing anything from slight unevenness to wild blotches and splotches. This significantly expands the creative range of the tool.

Largeur de plume

  • In all previous versions, pen width depended on zoom in such a way that the strokes appeared the same visible width at any zoom, but were in fact narrower at zoom-in and wider at zoom-out. This behavior makes sense if you want to keep the same "feel" of the pen regardless of zoom; for example, if you zoomed in to make a small fix to your drawing, it's natural that your pen becomes physically smaller but feels the same to you. So, this behavior is kept as the default, but now we also added an alternative mode where your pen width is constant in absolute units regardless of zoom. To switch to this mode, use the checkbox on the tool's Preferences page (you can open it by double-clicking the tool button).
  • The Width field in the tool's controls bar now changes from 1 to 100, which corresponds to the range from 0.01 to 1.0 in the previous version. If the "width in absolute units" mode is turned on, the value in this fields gives the width of the stroke in px units. In the default mode, the value of 100 gives 100px wide strokes only at 100% zoom, and strokes are correspondingly narrower or wider at other zoom levels.

Sélection

  • A new preferences option for the Calligraphic tool, Keep selected, controls whether the newly created object remains selected after you finish drawing it. If you turn it off (by default it's on) and set the tool to using Last Set color, you can easily choose a new color by clicking on the palette without having to worry if this will change the color of the stroke you just created. (Watch the tool style indicator at the right end of the Controls bar for the style of the next stroke you will draw.)
  • Esc deselects selected objects in Calligraphic, as in most other tools.

Style

  • The stroke you're drawing is now shown, while you're drawing it, with the correct color and opacity that it will eventually have, instead of always black as before.
  • On a new Inkscape installation, this tool now uses the last set style by default instead of the fixed black as before (this is changeable in the Inkscape Preferences for the tool).

Outil stylo (courbes de Bézier)

  • While drawing a path, you can now move the last node you created by the same keys as in Node tool - that is, arrows, with Shift (for 10x displacement) or Alt (screen pixel displacement) modifiers.
  • Also, you can switch the not-yet-finalized (red) segment of the path being drawn from curve to line (Shift+L) or back to curve (Shift+U), again the same shortcuts as in the Node tool.
  • By popular demand, if a new path is being drawn but not yet finished, Ctrl+Z cancels that unfinished path (i.e. does the same as Esc), instead of undoing the previous action.
  • In Pen tool, Del works the same as Backspace to delete the last created point on the unfinished path.

Masques et chemins de découpe

Inkscape now provides some UI for using clipping paths and masks.

  • Any object can be non-destructively intersected with a path (called a clipping path) so that only the intersected portion of the object is visible.
    • To apply clipping, select the objects to be clipped and the clipping path object, make sure the clipping path is above the other objects in z-order, and do Object > Clip > Set.
    • You can transform, edit, or style the clipped objects as usual. The clipping remains applied and transforms together with each clipped object.
    • To remove the clipping, do Object > Clip > Release. The clipping path is returned to the drawing as a regular object; it is inserted on top of the unclipped object in z-order.
  • Any object can be non-destructively masked by another object (called mask) so that: the mask's black or transparent areas become fully transparent in the masked object; mask's opaque white areas become fully opaque; and all intermediate colors translate into intermediate levels of opacity in the masked object. This allows you to apply, for example, arbitrary transparency gradients to objects.
    • To apply a mask, select the objects to be masked and the mask object, make sure the mask is above the other objects in z-order, and do Object > Mask > Set.
    • You can transform, edit, or style the masked objects as usual. The mask remains applied and transforms together with each masked object.
    • To remove the masking, do Object > Mask > Release. The mask is returned to the drawing as a regular object; it is inserted on top of the unmasked object in z-order.
  • Objects with clippath show their bounding box intersected with the bounding box of the clippath, instead of the original unclipped bbox as before. (However, this does not apply to objects without clippath of their own which are clipped by being inside a clipped group.)
  • Clipped or masked objects display "clipped" or "masked", correspondingly, in their statusbar descriptions.
  • Although Inkscape had render-only support for clipping paths and masks for quite some time, in this release we fixed a number of bugs which may affect the display of your documents using clippaths or masks.
    • Clippaths and masks with objectBoundingBox units are now shown correctly upon loading of the document.
    • Clippaths without fill didn't work, this is now fixed.
    • Objects with clippaths or masks are correctly copied/pasted between documents.

Transformations

Boîte de dialogue transformer

Fixes and improvements in the Transform dialog (Ctrl+Shift+M):

  • The Apply to each object separately checkbox is added, allowing you to scale/rotate/skew each selected object by the same amount, around that object's center. When off (by default), the selection is transformed as a whole. The status of this checkbox is remembered across sessions. (It has no effect on Move and Matrix tabs).
  • The Clear button resets the values on the current tab to defaults.
  • The Scale tab now allows you to specify horizontal or vertical size increments in percentage or absolute units. Also, there's a Scale proportionally checkbox which ensures that scaling preserves the width/height ratio. (If you are scaling several objects proportionally with "Apply to each object separately", you can only use the % unit to specify the scaling; otherwise each object's scale increments will have the width/height ratio of the entire selection, not of that specific object.)
  • The Skew tab can now specify the skew as an absolute displacement (e.g. for horizontal skewing of a rectangle, that means the shift of the top rectangle side relative to the bottom), as percentage displacement (e.g. a 1% horizontal skew of a rectangle means shifting the top side by 1% of the rectangle height), or as an angle (e.g. horizontal skew by 15 degrees results in the sides of a rectangle being rotated to that angle, while the top and bottom remain horizontal).
  • The Matrix tab (previously called "Transform") can either edit the current transform= matrix of an object, or post-multiply the transform= with the matrix you specify, depending on the Edit current matrix checkbox. (As it is now redundant, the transformation matrix in the Object Properties dialog is removed.)
  • The dialog now correctly watches selection changes in the active document window and updates its values accordingly.
  • The layout of the dialog is simplified, tooltips and mnemonics added for better usability.
  • Many bugs are fixed, especially in value conversions between units.

Centres de rotation persistants

  • The position of the center (axis) of rotation and skewing used by Selector is now remembered for all objects and restored when you select those objects again (even after saving and reopening the document). When you move or scale an object, its rotation center is moved or scaled too, so its position relative to the object always remains the same unless you move it explicitly.
  • When you have several objects selected, they use the rotation center of the first selected object. If the first object does not have center set (i.e. if it's in a default central position), then several objects will rotate around the geometric center of their common bounding box (as before).
  • Shift+click on the rotation center resets it back to the center of the object's box.
  • Consequently, dragging the rotation center is now an undoable action; you can press Ctrl+Z to undo the drag.
  • Keyboard rotation by [, ] keys with various modifiers, as well as the Rotate tab in the Transform dialog, work around the selected object's rotation center (for multi-object selection, the rotation center of the first selected object).
  • Rotation centers are preserved when duplicating, cloning (including clone tiler), grouping/ungrouping, and converting to path.

Coller les dimensions

A number of commands are added to easily scale selected objects to match the size of the object(s) previously copied to the clipboard. They are all in the Paste Size submenu in Edit menu:

  • Paste Size scales the whole selection to match the overall size of the clipboard object(s).
  • Paste Width/Paste Height scale the whole selection horizontally/vertically so that it matches the width/height of the clipboard object(s). These commands honor the scale ratio lock on the Selector controls bar (between W and H fields), so that when that lock is pressed, the other dimension of the selected object is scaled in the same proportion; otherwise the other dimension is unchanged.
  • Paste Size Separately, Paste Width Separately and Paste Height Separately work similarly to the above described commands, except that they scale each selected object separately to make it match the size/width/height of the clipboard object(s).

Connecteurs et disposition automatique

  • There have been numerous bugfixes and several improvements to the behaviour of connectors and the connector tool:
    • Connectors moved as part of a selection will now stay attached to other objects in the selection, rather than becoming detached from them.
    • By default, the Connector tool will not attach connectors to text objects. There is a new checkbox in the connector preferences to control this setting.
    • The margins around avoided shapes (used for autorouting connectors) can now be adjusted via the "Spacing" control on the controls bar.
  • Automatic Diagram Layout: A new button is available in the Align and Distribute dialog that performs automatic layout of diagrams involving a network of shapes and connectors. Layout is accomplished using force-directed graph layout based on the Kamada-Kawai algorithm. This algorithm treats edges as if they are springs such that the distance between nodes will be proportional to the path length - number of connectors - between them. Disconnected components (where not every shape is connected) will be arranged around the circumference of a circle.
  • There is a new Remove Overlaps button to move the selected objects enough that they don't overlap each other. A minimum spacing between the boundaries of objects can be specified. Together with the automatic layout tool, described above, this should be a significant addition to Inkscape's usability for diagramming. Removing overlaps is different from the "Unclump" button in that the former is completely deterministic and guarantees removing overlaps on the first application, but is not concerned with visual perceptive distances between objects. Unclumping, on the other hand, attempts to equalize perceptive distances between objects and can be applied repeatedly for gradual effect.

Vectorisation sélective avec SIOX

  • Inkscape 0.44 has an early version of the Simple Interactive Object Extraction (SIOX) algorithm (see siox.org) implemented in its bitmap tracing code. For a quick reference on how this is used, please see this file. This clever algorithm from the realm of Image Recognition allows you to select areas of similar color, with the goal of extracting a foreground area from the background. To use:
    • Enable the SIOX checkbox in addition to your usual tracing options.
    • Select both the bitmap and an object that covers the foreground and part of background, leaving only background areas of the image uncovered.
    • Hit OK. SIOX will now analyze and attempt to pull out the foreground-colored areas you want, and trace only those parts of the image.
  • The full SIOX selection mechanism (e.g. the ability to identify foreground and background areas separately) is not implemented yet, but is planned for a future release.

Adhérence

  • In addition to snapping to guides and grids, you can now snap to other objects' paths and/or nodes. As with grid and guide snapping, you can separately enable snapping of bboxes to objects and/or snapping of nodes to objects. Be aware, however, that this is experimental code - there may be surprises. It may also be slow in large documents with thousands of objects.
  • In addition to the snap sensitivity sliders in Document Preferences (which set snap distances in px), there are Always snap checkboxes (separately for object, grid and guide snapping) which force snapping at any distance.
  • Grid snapping now applies only to the visible grid lines. For example, if you have zoomed out so that only every 10th grid line is visible, snapping will only apply to these visible lines. In addition, default grid snap sensitivity is set to "Always snap". This will hopefully reduce the number of "snapping does not work" complaints from users who didn't zoom in close enough to see that snapping does in fact work, but only at sub-px distances to the 1px-spaced grid. At the same time, you can still snap to finely grained distances if you zoom in.
  • Guidelines are made easier to pick. Now you don't need to position mouse exactly over a guideline to activate it; instead there's a small position tolerance (1 screen pixel on each side of the guideline).

Sublayers

Previously, it was only possible to make a group a temporary sublayer by entering that group. Now Inkscape supports creating and using true persistent sublayers within a layer.

  • The Add layer dialog allows you to place the new layer above, below, or inside the current layer.
  • In Preferences (Selecting tab), options are added allowing the "Select All" command and Tab key selection to work either in the current layer only or in the current layer and its sublayers.

Marqueurs

  • Converting stroke to path now correctly processes dashed strokes. For paths with markers, this command now creates a group containing the stroke converted to path and all its markers as independent objects (i.e. they are not markers anymore, but instead you can easily transform them or paint them any color, as a workaround for the "markers don't take the color of the stroke" bug; to be properly fixed, this bug requires implementing some SVG 1.2 features).
  • The DimensionIn and DimensionOut markers are changed so that the arrow tips exactly correspond to node positions. It is now very easy to make dimension lines that correspond to drawn objects. The dimension specifications can now easily be chained by splitting a straight line at a point and assigning DimensionIn/Out markers to the resulting smaller paths whose endpoints coincide.
  • All arrow markers in the standard set are moved on the path so that their tips are as close as possible to the corresponding node of the path. Complete coincidence is not possible, because it would cause the blunt end of the stroke itself to be visible under the sharp tip of the arrow, distorting its shape. However, now the arrow tips are much closer to their nodes than before, and probably sufficiently close for many practical situations.
  • A new RazorWire path marker was added. By applying it as a mid-marker you can get a good approximation of a razor wire.


Effets d'extension

  • The Effects menu is now officially on and no longer an optional "experimental feature" as in past versions. The preference setting to enable the menu has been removed. Inkscape 0.44 comes with about 30 effects that perform a variety of useful tasks, such as path blending, randomization, function plotting etc.
  • Python effects (which includes almost all currently available effects) work on Windows out of the box, using a copy of Python shipping with Inkscape. The only minor inconvenience is that when an effect is launched, you get an empty console window that stays on while the effect is doing its work. (Don't close that window, it will disappear by itself when the effect is finished.)
  • A new Python effect, Render > LaTeX formula, allows you to type in any LaTeX formula and get a vector object with the TeX rendition of this formula inserted into your document. You need to have latex, dvips, and pstoedit installed and in PATH for this to work.
  • A new Python effect, Flatten Path, flattens paths in the current selection, approximating each path with a polyline whose segments meet the specified criteria for flatness.
  • A new Python effect, Measure Path, attaches a text label to each path in the selection giving the length of that path (in px units).
  • The Radius Randomize effect has a new parameter which enables normal distribution of random displacements instead of uniform as before, which gives a more natural feel to the randomized path.
  • The Render > L-system (formerly "Fractal (Lindenmayer)") effect is improved in this version. Now you can specify different angle values for turning left and right, which makes it possible to smoothly bend some L-systems sideways. Also, you can separately randomize the step length and the angles by a given percent for more natural look (this works especially well with plant-like branching shapes). This effect can be used to create Penrose tiling, Sierpinsky triangle, Dragon curve and other famous mathematical artefacts, as well as various meanders, friezes, patterns, and trees. Some examples can be seen on this screenshot: inkscape.org/screenshots/gallery/inkscape-0.44-lindenmayer.png as well as in the new example file share/examples/l-systems.svg.
  • The Interpolate Path, Random Tree, and L-system effects are fixed to place their result on the current layer instead of document root and in the center of the (last-saved) document view instead of 0,0 as before.
  • INX files now have the ability to hold more information. This includes tooltips and descriptions of the extensions. These are all also translatable.
  • Thanks to keyboard configurability, it is now possible to assign keyboard shortcuts to those effects you use most often, so you can activate them without going into the menu.

Formats

  • Inkscape's PDF export is now native (i.e. does not require any external applications) and supports transparency, including gradients with transparency. This replaced the old export extension that required Ghostscript and worked via Postscript, losing any transparency. The new PDF export is still immature; in particular it does not handle text, so you should check "Convert text to path" on the export options dialog. Other things not yet supported include: gradients on stroke; eccentric elliptic gradients; patterns, masks, and clipping paths; embedded images.
  • You can now Save as Compressed Inkscape SVG with media.This save option collects the svg file and all linked images into a zip archive for distribution. Although you cannot open the resulting archive directly with inkscape, the media is linked such that after unzipping you can open the SVG file immediately.
  • An output format for desktop cutting plotters, such as the Wishblade and Craftrobo, was added. This format is a very minimalist DXF file with appropriate scaling and translation applied. This output format should not be expected to operate as a generalized DXF output.
  • Inkscape can open/import default files generated by the Xfig vector graphics editor. This requires that the fig2dev command (transfig) is in your PATH.
  • Starting with this version, there is a limited ability to export Inkscape drawing shapes as Open Document Format drawings (.odg files). Currently the export is limited to text, shapes, and solid fill and strokes. This output will be improved in the coming months. In the meantime, however, ODG output is already useful for getting your SVG drawings into the Open Document world, in particular into an office suite such as OpenOffice.org.
  • The new XCF output extension exports all top-level elements (i.e. layers and objects directly under root) as PNGs and assembles them into an XCF for procesing in GIMP. Requires Python, PyXML and GIMP. GIMP 2.2.x or above must be in the path and be named gimp. A version of Inkscape 0.44 or above must be accessible from the path. Does not function in Windows yet.

Raccourcis divers

  • Now you can use Shift+middle button drag, in any tool, to zoom into an area. This works the same as simple drag in Zoom tool, but is faster because it does not require switching away from your current tool. Together with middle button drag (panning), middle button click (zoom in) and Shift+middle button click (zoom out), this completes the set of canvas navigation shortcuts available in any tool or context.
  • In Gradient tool, Shift+R reverses the gradient definition (i.e. mirrors the stop positions) without moving the gradient handles. For example, an elliptic gradient with blue center and red periphery becomes red in the center and blue in the periphery. This works on the gradient(s) of the currently selected gradient handle or, if no handle is selected, on all selected objects' gradients. (Compare with the Node tool where Shift+R reverses the direction of the selected path.) This is especially convenient for elliptic gradients which, unlike linear, you cannot simply rotate by 180 degrees for the same result.
  • In Selector, Ctrl+Enter enters the selected group (making it a temporary layer). Ctrl+Backspace leaves the current layer and goes one layer up in the hierarchy (but not to root).

Améliorations diverses

  • Document templates (listed in File > New) are now first searched in the templates subdirectory of the user's profile directory (on Linux it's ~/.inkscape/templates), then in the system-wide Inkscape templates directory. This allows you to add your own templates on top of the list of standard templates, as well as override the default template with your own one (the default.svg in the profile directory has priority over the system-wide one).
  • When toggling one of the "transform with object" buttons (for stroke width, rounded rectangle corners, gradients, or patterns), a message is displayed in the statusbar explaining what has changed in the program's behavior. Hopefully this will reduce the number of complaints from users who had accidentally toggled one of these and were surprised by the result.
  • Whole thousands above 2000 in the rulers are now displayed as 2k, 3k, 4k etc.
  • In the Document Preferences dialog, the new object style for each tool is now shown as a style swatch (displaying fill/stroke colors and opacity, stroke width, and master opacity), similar in design to the selected style indicator in the statusbar.
  • In the Grid Arrange dialog, row/column spacing can now be negative.
  • The installation default is now to scale the rounded rectangle corners with the rectangles themselves (the previous default mode, still available as an option, was to keep rounding radii unchanged when scaling rectangles).
  • Added a new --export-area-canvas command line parameter that causes the exported PNG to contain the full canvas. This option as well as --export-area-drawing and --export-area can now be used along with --export-id and --export-id-only for greater flexibility.
  • The --query-* command line parameters now return the true SVG bounding box of the object instead of the Inkscape coordinate system bbox (with inverted Y axis). The new behavior makes more sense for scripting use of Inkscape.
  • The dpi value in the Export dialog has had its range extended; now possible values are from 0.01 to 100000.
  • Individual <tspan>s within text objects (including line tspans) can now be selected via the XML editor to view their bounding boxes (though per SVG, you cannot transform them). Also, you can use the --query-* command line parameters to find out the bounding boxes of tspans from a script. (Individual strings within or between tspans are still not selectable, and they cannot have an ID for querying anyway.)
  • The placeholder image which is shown when a bitmap file was no longer accessible reads now "Linked image not found" instead of the confusing "Broken image".
  • Cloning multiple selected objects now works as expected (i.e. each selected object is cloned separately, similar to the Duplicate command). Previously you could only clone a single selected object.
  • The separate "license" and "contributors" dialogs have been merged into tabs on the About dialog. The about dialog now correctly sizes itself to fit the size of the splash SVG (while remaining resizable), and the rendering area is now cropped to the correct aspect ratio when the dialog is resized. The dialog also now displays the build information in the upper right corner.
  • In the Transform dialog / Rotate tab, the icon was flipped horizontally to be in line with the direction of positive rotation; the change was applied to the default (now crispy) and legacy icon sets.
  • The scale ratio lock button on the Selector controls bar shows a closed lock when pressed and open lock otherwise (same as the layer lock in the statusbar).
  • The Browse button on Export dialog now opens the new file chooser, same as those used by Open and Save.

Corrections diverses de bogues

  • Reading a document with an incorrect namespace URI not only did not cause Inkscape to complain, but could also "pollute" Inkscape's internal namespace table, resulting in an "infection" of subsequently saved documents by the incorrect namespace. This is now fixed, but as a result, documents with incorrect namespace URIs will no longer load. You will have to edit them in a text editor to fix the namespaces.
  • With newer versions of GTK, dragging with graphics tablet pen did not work in some tools and contexts (in particular, in Node and Rectangle tools). This is fixed.
  • Scaling of objects with stroke in Selector used to cause undesired shifts of the scaled object, as well as scaling it in the dimension which was intended to remain untouched (e.g. slight change in width when you scale only height). All these problems are now fixed, both for interactive scaling by mouse and for numeric scaling via the Controls bar, and for both values of the "Scale stroke with objects" option. Among other things, this means that stroked objects no longer lose snapping on scale, and that the "Default scale origin" option in the Selector tool preferences finally works as designed. Caveat: There may still be problems if you scale a selection that contains objects with different stroke widths.
  • Scaling of stroke now works for objects that didn't specify stroke-width; before, they always ended up with the default 1px stroke.
  • The bounding box for text and flowed text objects did not include stroke width. This has been fixed.
  • Stroke miterlimit on text objects was misinterpreted in absolute units instead of multiplies of stroke width (resulting in miter joins rendered as bevel).
  • The unfinished path in Pen tool is now cancelled, not finalized, when you switch away from the Pen tool. Apart from being more intuitively correct, this also fixes a crash when you quit Inkscape with the unfinished path in Pen tool.
  • Fonts on Win32 now use the native font mapper, meaning that Inkscape's font list is the same as other Windows programs, and the (potentially) very long delay experienced when using fonts for the first time in each session is gone.
  • Setting dash pattern was broken for transformed objects, and copy/paste of style with dash pattern did not apply correctly to objects with transforms.
  • An error caused a complete extra screen redraw after each zoom operation. That is, after you press "+" in a complex drawing, Inkscape redraws, but for some time after that it remains still unresponsive because it does that second redraw (invisibly for you, i.e. nothing changes on the screen). This is fixed.
  • Gradient rendering was off by one pixel, which often resulted in visibly wrong gradient rendering for small objects or in zoom-out.
  • The SVG path parser could not handle fractional numbers with the initial dot.
  • Several pattern rendering bugs are fixed, discovered by working with SVG files exported from Adobe Illustrator.
  • Inkscape on Mac OS X will now notice fonts in your ~/Library/Fonts directory, in addition to the other standard places.
  • Inkscape couldn't be compiled with libxml versions <= 2.6.9, and we now bumped the requirements from 2.6.0 up to libxml >= 2.6.11, which is the earliest you can get officially, anyway.
  • Inkscape no longer crashes when presented with a defective inx file for extensions.
  • More document memory is now freed when documents are closed.
  • EPS output now correctly includes an %%EOF footer.
  • There was a regression in 0.43 that caused several minor, though annoying bugs; knots and handles remained highlighted after the mouse was released, and the rubberband selection rectangle stayed visible if the selection was ended over a node while in the node tool. This regression has been fixed.
  • The connector routing code would previously sometimes confuse objects between multiple documents resulting in strange routing behaviour. This has been fixed.
  • There existed a bug in 0.43's Inkboard code that allowed a malicious outsider to very easily disrupt an Inkboard session. This has been fixed.
  • There existed a bug in 0.43's Inkboard code that would cause deadlocks in the case that two users attempted to invite each other at the same time (see bug #1352522 for further details). This should be fixed, although the fix has not been widely tested.
  • There existed a bug in 0.43's Inkboard code that would cause session invitations to not appear on the invitee's screen. This was the result of a mistake in handling GDK modifier flags, and has been fixed.

Traductions

  • les fichiers INX (qui gèrent l'interface des effets externes) permettent maintenant la traduction des chaînes visibles par l'utilisateur. Ce qui signifie que les boîtes de dialogue, les sélections de type de fichier et les noms d'extensions peuvent désormais être traduits.
  • Inkscape est maintenant significativement traduit en 18 langues : Allemand, Basque, Catalan, Chinois (simplifié et traditionnel), Espagnol, Français, Hongrois, Italien, Lituanien, Norvégien (dialecte de Bokmål), Polonais, Russe, Serbe (cyrillique et latin), Slovène, Tchèque et Vietnamien. De plus 21 autres langues sont en partie traduites. Le pourcentage de chaînes traduites est passé de 49% à 61% dans cette version.
  • De nouvelles traductions des didacticiels ont été apportées par des contributeurs : en tchèque, portugais (Brézil) et russe.

En interne

  • The Document Properties Dialog code was completely gtkmmified, which lead to dramatic reduction of code size due to usage of widget objects. The used widget objects should be reusable by other dialogs, too, and the code is much more readable.
  • Work on optimizing includes in all cpp files started, using the purgeincludes tool specifically written for that purpose, and ended with 40% of include lines removed!

Problèmes connus

Problèmes avec certains paquets Debian libgc-6.7

  • Inkscape se figera ou plantera s'il est lié à la première version du paquet Debian de la librairie ramasse-miettes (garbage collection) Boehm. ce problème a été résolu dans la version 1:6.7-2 du paquet. Si vous avez un système Debian avec la libgc 6.7, vérifiez que vous utilisez cette version (ou une version ultérieure) de ce paquet.

Problèmes avec l'option "Composite" de X.org

  • Certaines pré-versions d'Inkscape-0.44 subissaient des plantages si l'option "Composite" était activée dans la configuration de X.org. Ce problème est résolu dans la version finale.

Les espaces de nom (namespaces) peuvent nécessiter d'être réparés

Attention aux thèmes défectueux sous Linux

  • Inkscape and other Gtk programs can crash on any Linux, when the gtk2-engines-smooth / libsmooth package is installed. We have filed a bug against libsmooth which is now in gtk-engine and part of gnome. Removing the package resolves the problem. Update: this bug appears to be fixed in newer versions of gtk-engines. However, but it would be nice if you as affected user would inform the gtk-engines maintainers of any further problem.
  • A similar crash happens if the KDE Baghira theme or the package gtk_qt_engine are installed. If you experience Inkscape crashes on KDE, please try to install a different theme from Baghira, or uninstall the gtk_qt_engine package from your system. Both problems also affect older versions of Inkscape.

N'oubliez pas de supprimer le fichier menus.xml s'il est présent

  • If you were using certain CVS/SVN builds from autumn of 2005, you may have the file menus.xml hanging around in your profile directory (e.g. ~/.inkscape on Linux). In that case you will see many errors about verbs that cannot be found, and some commands in menus will be disabled. Make sure to delete menus.xml to fix this.

Versions précédentes

Retrieved from "https://wiki.inkscape.org/wiki/index.php?title=Release_notes/0.44/fr&oldid=7057"