Compiling Inkscape on Windows 32-bit

Note: We're currently investigating to move to MSYS2 for building Inkscape on Windows. Please see Compiling Inkscape on Windows with MSYS2 for the updated instructions.

You're encouraged to test the new method and give feedback regarding any issues you might encounter. If no severe issues are found it's likely this will become the recommended method for building trunk in future and might also be considered for building the 0.92.x stable branch.

For 64 bit: see Compiling Inkscape on Windows 64-bit
Warning: As our 32-bit development libraries (devlibs) currently do not offer GTK+ 3 (which is required by trunk) you have to follow the instructions for 64-bit builds or use MSYS2 if you want to compile the latest code (lp:inkscape)!

---

Inkscape was originally written for Linux, but it has been ported to other platforms, including Windows. Since Windows is not POSIX compliant and doesn't have several features useful to developers (like package management), compiling Inkscape on Windows is more tedious than on Linux, but perfectly possible. To make it easier, we have compiled a package that contains all the libraries you need to build Inkscape. This reduces the effort of compiling Inkscape to: download and install 3 programs, download library package, download sourcecode, and you are ready to go.

Setting up the build environment

To develop Inkscape, you will need the following things:

• Bazaar
• PuTTY programs: puttygen.exe and pageant.exe
• TDM's GCC (MingW): Please use exactly the version 4.6.1 32bit bundle installer and follow the instructions below. In the setup, Uncheck the [Check for updated files on the TDM-GCC server] when installing, or it will install a newer version. Newer versions (tdm-gcc-4.7+) introduce important changes in gcc and don't work with the current Inkscape devlibs (see the discussion on the developers' list).
• Launchpad account

In order to build the installer (not needed for most developers):

• Windows Installer XML Toolset for rencent msi builds
• NSIS 2.46

Install the compiler

Run the TDM-MinGW installer:

1. Install in a path that doesn't contain spaces. The path 'C:\mingw' is ideal beacuse it is currently set in the mingwenv.bat file (along with the location of devlibs).
   • TDM-MinGW's default install option may be to a different location. You will have to edit the mingwenv.bat file to point there.
   • If you install it into another path, set the environment variable MINGW_PATH to the TDM-MinGW installation directory, e.g. the one containing README-tdm-gcc.txt (right click My Computer -> Properties -> Advanced -> Environment Variables).
2. Be sure to enable the "GCC -> openmp support" checkbox from the components list

Create your Launchpad account

You can skip this step (or do it later) if you just want to download the sources, but not submit your changes.

If you do not have an SSH public/private key pair to identify yourself:

• run the program puttygen.exe to generate an SSH key
• save both its parts.

Log into your Launchpad account, go to your profile page and add the public part of the generated key to the list of SSH keys. Run the program pageant.exe (you can add it to Autorun). A tray icon should appear. Right click it, select "Add Key" and pick the private key file you have just generated from the dialog. Note that you need to repeat this after every login whenever you want to access Launchpad.

Now set up Bazaar. First tell it who you are, then associate with your Launchpad account. You need to use the account name (e.g. johnq), not the display name.(John Q. Public).

C:\> bzr whoami "Your Name <your_real_email@example.com>"
C:\> bzr launchpad-login "your_launchpad_account"

Error messages using Bazaar

If you are seeing this error message in your Windows console:

         Connected (version 2.0, client Twisted)
             bzr: ERROR: Connection error: Unable to authenticate to SSH host as
               <email address hidden>
             supported auth types: ['publickey']

Please make sure to check Creating An SSH Key Pair and make sure you setup your key pair correctly (pageant.exe, puttygen.exe and plink.exe).

Install the developer libraries

Check out Inkscape Devlibs into C:\devlibs. If you check them out elsewhere, set the environment variable DEVLIBS_PATH to the path where they are. Devlibs are a bundle of all the libraries needed to compile Inkscape. If you experience any problems, make sure you have an up to date copy of those libraries and an up to date checkout of Inkscape source. To reduce the size of the download, pass the --lightweight parameter.

C:\> bzr checkout --lightweight lp:inkscape-devlibs devlibs

To update devlibs:

C:\devlibs> bzr update

All Inkscape developers can commit to the devlibs trunk. Advanced information about Devlibs, mainy useful when you want to update them to newly released versions of upstream libraries, is available here: Inkscape Devlibs. You can see some infomation from launchpad:inkscape-devlibs and trunk/files.

Obtaining Inkscape source code

You can obtain released Inkscape source from a tarball. Since version 0.47 they are hosted on Inkscape's Launchpad page. There are ready-made installers provided, so there's usually little reason to compile the stable version yourself.

To obtain cutting edge code, check out Inkscape source from the Bazaar repository. You can also use the TortoiseBZR shell extensions to do this. The recommended way is to first create a shared repository, then check out the Inkscape branch into that shared repository. Using this setup, branching will be a lot faster.

C:\src\inkscape> bzr init-repo --rich-root .
C:\src\inkscape> bzr upgrade
C:\src\inkscape> bzr checkout lp:inkscape trunk

If you don't want to create any branches, you can skip the shared repository step.

C:\src> bzr checkout lp:inkscape

IMPORTANT: make sure that the path to your Inkscape source checkout does not contain spaces. Unix tools do not like them and you will end up with a lot of error messages about missing files.

Building

Environment variables

Edit the file mingwenv.bat in the root directory of the Inkscape source to match you local paths. Most importantly the two lines:

# Path to the Inkscape development libraries.
if "%DEVLIBS_PATH%"=="" set DEVLIBS_PATH=c:\devlibs

# Path to the MinGW installation. Note: MinGW does not work with white spaces in the path name.
if "%MINGW_PATH%"=="" set MINGW_PATH=c:\mingw

should point to the folders containing MinGW and the inkscape-devlibs.

Whenever you want to build Inkscape open a command prompt (cmd.exe), change into the root directory of the Inkscape source and set the environment variables with the following command:

mingwenv.bat

Compiling Inkscape using CMake

Note: To significantly reduce the time needed for incremental rebuilds consider using CMake in combination with Ninja.

Go to the directory containing your Inkscape source and create the build output directory. In example:

mkdir build
cd build

You can also create an out of source build anywhere else in your file system. Just make sure that you pass the correct path to the source code directory in the next step. Create the makefiles using CMake:

# Pass the path to the source code directory as a parameter.
cmake -G "MinGW Makefiles" ..

Start the build process. The compiled Inkscape.exe will be in bin directory afterwards:

# 2 is the number of parallel threads to use for compiling. Increase the number to utilize more of your available CPU cores.
mingw32-make -j 2

Note: The version of mingw32-make included in TDM GCC 4.6.1 (this is what you should be using when building 32-bit Inkscape) does not have jobserver support, yet. As CMake makes use of recursive make calls the -j option won't have any effect on the recursively spawned instances. You can work around this by executing set MAKE=mingw32-make -j 2 before starting the compilation process (this will make each spawned instance use up to 2 jobs).

Collect all the needed files and create a selfcontaing directory:

mingw32-make DESTDIR=mydir install

See this article in stackoverflow about the difference in DESTDIR and PREFIX of make. After this step we have a *mydir/Program Files/inkscape/* where everything should be. (Note: Using relative paths with DESTDIR is currently broken. Usually you can just omit the command to simply install into ./build/inkscape/)

As cmake hides the actual compiler calls, here is a way how to see what make is doing.

mingw32-make VERBOSE=1 -j 2

If something goes wrong

Execute the following commands from the build directory

rm -r CMakeFiles
rm CMakeCache.txt

and start with running CMake (see above) again.

If something goes very wrong

Remove the build directory and start over.

Compiling Inkscape using btool (deprecated)

Note: This method was the default up to Inkscape 0.91. It still works in 0.92 but compiling using CMake as described above is the preferred option.

Now compile the build tool with the following command:

C:\src\inkscape\trunk> g++ buildtool.cpp -o btool -fopenmp

The -fopenmp flag enables OpenMP which allows to use parallel compilation threads when building Inkscape.

Building Inkscape

Finally initiate the compilation. Get a coffee or take your dog out for a walk, because it will take a rather long time. If you have a multicore processor, add "-j 8" to use (for example) 8 parallel compilation threads.

C:\src\inkscape\trunk> btool -j 8

Once everything is done, there should be an inkscape directory that contains the Inkscape executable and libraries needed to run it.

Rebuilding

If you have only changed a few files and want to rebuild, delete the inkscape directory and run btool again.

To rebuild from scratch, execute the following sequence of commands:

C:\src\inkscape\trunk> btool clean
C:\src\inkscape\trunk> btool

Dealing With Build Errors

Feel free to add any questions or answers you have in here;

Q - My firewall software (Comodo's Defense+ component or similar) stopped the process continuing to the next step in the build, because I wasn't there to permit an action and it timed out. What can I do?

A1 - The best thing is to disable stuff like Defense+ (put it in learning mode works) because it will stop any process that is not approved, and building makes new files which can't be approved before they're built. Disabling Comodo's Defense+ does not disable your firewall, either inbound or outbound, but just the part that scans every application for suspicious operations. Other firewalls etc may vary.

A2 - If that doesn't suit, often you can simply run btool again and wait for Defense+ (or similar) to ask for approval for the process, and it will then continue as normal with the build. But remember that approving all the processes involved in the build process once doesn't mean they will all slip through next time.

A3 - This is the more complex way to continue, but may help if you have problems with A2. If you know the stage the process was meant to be up to (look at the output in the command windows and compare to the stages in the build.xml file), you can start again from there.

You may see something like this in the command window;

    =============================
    ## Target : link : link objects and library to create executable
    ---- task : rc
    ============ cmd ============
    windres -o build/inkres.o --include-dir=src src/inkscape.rc
    =============================
    ---- task : link

This will likely be followed by an error message. This means you were at the link stage

Now simply type;

    ...>btool stage

Or in this case

    ...>btool link

And the build will continue from there.

After this, you will probably have to step through the remaining stages manually, one by one. The stages can include (see build.xml, where each stage is labelled 'target name="target"') init, touchabout, compile, java, lib, i18n, link, linkinkview, dist, dist-all, clean.

Q - How do I rebuild just one file.o file? For instance if one particular file has gone wrong, or I want to try patching just one part of the code.

A - To find the right command for building any particular file in Inkscape, just look in the compile.lst after you have used btool once. Search for the name of the particular file (eg: print.cpp) and you will find the command used to compile it. You'll need to paste this into a text file, remove any carriage reurns and then paste that onto the command line.

Q - After I patched a file, I left a backup of the old file in the same directory called Copy of{filename}.cpp. The compiler complains about this file when building and stops.

A - Do not leave anything with a suffix .cpp in the source directories, apart from the original (or patched) source files. The build tool will try to compile everything ending in .cpp and will complain. If you backup an old file in the same directory before patching, call it {filename}.cpp.old or similar.

Q - I think I followed the instruction above. What could have caused the compiling error like this for src/extension/internal/pdfinput/pdf-parser.cpp?

    src/extension/internal/pdfinput/pdf-parser.cpp:2248: error: no matching function for call to 'GfxFont::getNextChar(char*&, int&, CharCode*, Unicode [8], int, int*, double*, double*, double*, double*)'

Same error for line 2297 as well.

For more information

There is some old information on building Inkscape with either Mingw on Windows, or a cross-compiler on Linux, at http://inkscape.modevia.com/win32_inkscape_org/win32buildnotes.html and old files mey be http://inkscape.modevia.com/win32libs/

Creating an installer

There are currently two complementary methods:

• NSIS (Nullsoft Scriptable Install System), for creating an *.exe installer
• WiX Toolset (Windows Installer XML Toolset), for creating an *.msi installer

NSIS provides a higher degree of freedom giving the .exe installer some advantages, notably translations, better component selection and smaller file size.

MSI however is the format preferred by many computer experts because it's a format standardized by Microsoft (i.e. it should always work) and facilitates administrative installation tasks.

In the long run it would be desirable to have a single solution combining the advantages of both methods and preferably allowing to create *.exe and *.msi installers at the same time. Input and contributions are welcome!

NSIS installer (*.exe)

In order to create an *.exe installer you need to download and install NSIS. Starting with Inkscape 0.92 a Unicode installer is built, so you need at least NSIS 3.0 (which is the first version with official Unicode support).

1. Compile Inkscape as described above.
2. You should then have a distribution directory containing all necessary files in either …\inkscape or …\build\inkscape sub-folder.
   At least this is where NSIS will be looking for it. If you have set-up paths differently define INKSCAPE_DIST_DIR in inkscape.nsi accordingly.
3. Compile the file …\packaging\win32\inkscape.nsi using NSIS (e.g. by right clicking the file and choosing "Compile NSIS Script").

Once finished compiling (to reduce compile time you can choose a compressor different from LZMA) you should have a brand-new Inkscape *.exe installer in the …\packaging\win32 folders.

WiX Toolset (*.msi)

In order to create an *.msi installer you need to download and install the WiX Toolset.

Step-by-step instructions can be found in the file …\packaging\wix\README.

Windows store (*.appx)

In order to upload the installer on the windows store, you need to use the desktop app converter to create a .appx from the msi installer. The correct commandline is :

C:\src\inkscape\trunk> desktopAppConverter -Installer Inkscape-0.92.1-x64.msi -Destination C:/Users/Inkscape/SomeFolder/ -PackageName 25415Inkscape.Inkscape -Publisher CN=XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX -Version 0.92.1.0 -MakeAppx -AppDisplayName Inkscape -PackagePublisherDisplayName Inkscape -PackageDisplayName Inkscape -AppID Inkscape

The correct CN name can be found on the windows developer admin panel where you upload the package.

Note about Unicode

The GTK stack depends on functions only present in NT-based Windows (2000 and later). Therefore, Inkscape code can assume that Unicode functions from the Windows API (like GetCommandLineW) are always present. Note however that you should use the GLib/GTK functions rather the Windows API whenever possible.

See also

• Compiling Inkscape
• Using Visual Studio