Difference between revisions of "SpecFilletChamfer"

From Inkscape Wiki
Jump to navigation Jump to search
Line 9: Line 9:


== Design ==
== Design ==
The illustration below shows the steps involved in filleting the corner of a path:
[[Image:Fillet.png]]
[[Image:Fillet.png]]
Filleting a corner is a 3-step process. First, the centre point for the arc must be calculated (fig 1 and fig 2a). Second, the arc's sweep must be calculated so that it merges with the parent path at the tagents (fig 2b). Third, the point of the corner must be snipped off, and the arc welded on (fig 2c)


== TODO ==
== TODO ==

Revision as of 11:51, 2 February 2008

Launchpad Entry: https://blueprints.launchpad.net/inkscape/+spec/fillet-tool

Summary

Release Note

Rationale

Design

The illustration below shows the steps involved in filleting the corner of a path: Fillet.png Filleting a corner is a 3-step process. First, the centre point for the arc must be calculated (fig 1 and fig 2a). Second, the arc's sweep must be calculated so that it merges with the parent path at the tagents (fig 2b). Third, the point of the corner must be snipped off, and the arc welded on (fig 2c)

TODO

* Flesh this specification out in more detail

Discussion