Difference between revisions of "Compiling Inkscape on Windows 64-bit"

From Inkscape Wiki
Jump to navigation Jump to search
(→‎Compiling Inkscape using CMake: add note about non-functioning DESTDIR)
(update links to archived 32-bit instructions)
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
'''For 32 bit: see [[Compiling Inkscape on Windows]]'''
{{Note|The information on this page is outdated. Please see '''[[Compiling Inkscape on Windows]]''' for the updated instructions.}}
 
'''For 32 bit: see [[Compiling Inkscape on Windows 32-bit]]'''


----
----


Compiling Inkscape on Windows 64-bit works similar to [[Compiling Inkscape on Windows|compiling Inkscape on Windows 32-bit]] where you can find additional information.
Compiling Inkscape on Windows 64-bit works similar to [[Compiling Inkscape on Windows 32-bit|compiling Inkscape on Windows 32-bit]] where you can find additional information.


This page only describes the basic steps that are required while highlighting the differences compared to a 32-bit build.
This page only describes the basic steps that are required while highlighting the differences compared to a 32-bit build.
Line 62: Line 64:


=== Compiling Inkscape using CMake ===
=== Compiling Inkscape using CMake ===
Go to source code directory and create the build output directory. In example:
 
''Note: To significantly reduce the time needed for incremental rebuilds consider [[CMake#Using CMake with Ninja to build Inkscape|using CMake in combination with Ninja]].''
 
Go to the directory containing your Inkscape source and create the build output directory. In example:


<pre>
<pre>
Line 83: Line 88:
</pre>
</pre>


Collect all the needed files and create a selfcontaing directory:
Collect all the needed files and create a selfcontaing directory in  <code>./build/inkscape/</code>:


<pre>
<pre>
mingw32-make DESTDIR=mydir install
mingw32-make install
</pre>
</pre>
See [http://stackoverflow.com/questions/11307465/destdir-and-prefix-of-make this article] in stackoverflow about the difference in DESTDIR and PREFIX of make. After this step we have a *mydir/Program Files/inkscape/* where everything ''should'' be. ''(Note: Using relative paths with <code>DESTDIR</code> is currently broken. Usually you can just omit the command to simply install into <code>./build/inkscape/</code>)''


As cmake hides the actual compiler calls, here is a way how to see what make is doing.
As cmake hides the actual compiler calls, here is a way how to see what make is doing.
Line 96: Line 99:
mingw32-make VERBOSE=1 -j 2
mingw32-make VERBOSE=1 -j 2
</pre>
</pre>
; If something goes wrong
Execute the following commands from the <code>build</code> directory
<pre>
rm -r CMakeFiles
rm CMakeCache.txt
</pre>
and start with running CMake (see above) again.
; If something goes very wrong
Remove the <code>build</code> directory and start over.


=== Compiling Inkscape using btool (deprecated) ===
=== Compiling Inkscape using btool (deprecated) ===

Latest revision as of 19:04, 25 October 2017

Note: The information on this page is outdated. Please see Compiling Inkscape on Windows for the updated instructions.

For 32 bit: see Compiling Inkscape on Windows 32-bit


Compiling Inkscape on Windows 64-bit works similar to compiling Inkscape on Windows 32-bit where you can find additional information.

This page only describes the basic steps that are required while highlighting the differences compared to a 32-bit build.

Requirements

MinGW-w64

Get MinGW-w64 which contains the necessary GNU developer tools to build Inkscape on Windows.

You have to download a version that is configured for building native win64 applications with win32 threading model and SEH exception handling, to ensure compatibility with the inkscape-devlibs64.

A matching build based on GCC 5.3 can be downloaded here. The exact version used for building the inkscape-devlibs64 is MinGW-w64 x86_64-5.3.0-release-win32-seh-rt_v4-rev0.7z.

Development libraries for Windows 64-bit

Get the inkscape-devlibs64 which include pre-compiled binaries of all Inkscape dependencies.

To checkout via Bazaar use the command

bzr checkout --lightweight lp:inkscape-devlibs64 C:\devlibs64

The --lightweight switch ensures that you only have to download the latest version of all binaries, C:\devlibs64 is the folder you want them to be downloaded to.

See also Inkscape Devlibs 64-bit (only relevant if you want to update the development libraries)

Inkscape source code

Get the Inkscape source code from launchpad

To checkout via Bazaar use the command

bzr checkout lp:inkscape C:\inkscape

See also additional information on obtaining Inkscape source code and working with Bazaar.

CMake

CMake is a Cross-Platform buildsystem generator similar to autotools. It generates makefiles to be processed by make. Get CMake from the official website cmake.org. As of writing version 3.5.2 is the most recent version.

Building

Environment variables

Edit the file mingwenv.bat in the root directory of the Inkscape source to match you local paths. Most importantly the two lines:

# Path to the Inkscape development libraries.
if "%DEVLIBS_PATH%"=="" set DEVLIBS_PATH=c:\devlibs64

# Path to the MinGW installation. Note: MinGW does not work with white spaces in the path name.
if "%MINGW_PATH%"=="" set MINGW_PATH=c:\mingw64

should point to the folders containing MinGW-w64 and the inkscape-devlibs64.

Whenever you want to build Inkscape open a command prompt (cmd.exe), change into the root directory of the Inkscape source and set the environment variables with the following command:

mingwenv.bat

Compiling Inkscape using CMake

Note: To significantly reduce the time needed for incremental rebuilds consider using CMake in combination with Ninja.

Go to the directory containing your Inkscape source and create the build output directory. In example:

mkdir build
cd build

You can also create an out of source build anywhere else in your file system. Just make sure that you pass the correct path to the source code directory in the next step. Create the makefiles using CMake:

# Pass the path to the source code directory as a parameter.
cmake -G "MinGW Makefiles" ..

Start the build proccess. The compiled Inkscape.exe will be in bin directory afterwards:

# 2 is the number of parallel threads to use for compiling. Increase the number to utiliize more of your available CPU cores.
mingw32-make -j 2

Collect all the needed files and create a selfcontaing directory in ./build/inkscape/:

mingw32-make install

As cmake hides the actual compiler calls, here is a way how to see what make is doing.

mingw32-make VERBOSE=1 -j 2
If something goes wrong

Execute the following commands from the build directory

rm -r CMakeFiles
rm CMakeCache.txt

and start with running CMake (see above) again.

If something goes very wrong

Remove the build directory and start over.

Compiling Inkscape using btool (deprecated)

Note: This method was the default up to Inkscape 0.91. It still works in 0.92 but compiling using CMake as described above is the preferred option.

Compile btool (the command line tool that handles the actual build) using

g++ buildtool.cpp -o btool -fopenmp

Use btool to compile Inkscape compile and create the distribution directory:

btool -file build-x64.xml -j 2

The file build-x64.xml contains the necessary instructions for creating a standard 64-bit build.
If you want to make a GTK+ 3 build use build-x64-gtk3.xml instead (please note that GTK+ 3 builds are experimental and not ready for production yet).

The -j switch allows to instruct btool to use multiple parallel threads to speed up compilation (e.g. 2 in the example above).